SPEEDAIRE
SPEEDAIRE PN31XG7006G Swivel Mounting Bracket Stainless Steel
Stainless-steel swivel bracket mounts one RWA-SUS series reel to bench, cart, floor or truck with four half-inch holes on a 10 1/4 in centre height
- Swivel base enables flexible reel positioning
- Stainless steel construction resists corrosion in harsh environments
- Four half-inch mount holes simplify secure installation
- Designed for RWA-SUS series reel compatibility
- Bench, cart, floor or truck mounting versatility
Swivel Mounting Bracket Stainless Steel
The SPEEDAIRE PN31XG7006G is a stainless steel swivel mounting bracket designed for a single reel from the RWA-SUS series. It suits workshops, service trucks or mobile carts where a hose reel must rotate freely while remaining securely anchored. The four half-inch mount holes accept standard hardware for bench, floor or vehicle-bed installation. Buyers who need to mount multiple reels on one bracket or who require a fixed non-swivel base will not be served by this model.
Dimensions and mounting pattern
Overall height measures 11 13/16 inches, overall width 14 11/16 inches and overall depth 5 3/16 inches. The mounting base spans 14 3/4 inches wide by 11 7/8 inches high with hole centres spaced 10 1/4 inches vertically. Four mounting holes of 1/2 inch diameter align with the supplied pattern for the Grainger item 31XG70 and manufacturer model 31XG70. No moving parts contact fluid or generate heat so thermal, noise and power-draw considerations do not apply to this passive bracket.
Compatibility and regulatory notes
The bracket is specified only for the RWA-SUS reel series and the matching Grainger and manufacturer model numbers listed above. It ships directly from the manufacturer with no additional hardware, lubricants or software included. A California Proposition 65 warning applies because the product contains a chemical known to the state to cause cancer and birth defects or other reproductive harm. Installers working in jurisdictions with stricter material restrictions should verify compliance before mounting.
Highlights
- Swivel base enables flexible reel positioning
- Stainless steel construction resists corrosion in harsh environments
- Four half-inch mount holes simplify secure installation
- Designed for RWA-SUS series reel compatibility
- Bench, cart, floor or truck mounting versatility
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How do I install the PN31XG7006G swivel bracket on a bench, and what step is often missed?
Bolt the 14 3/4 in wide stainless base through its four 1/2 in holes spaced 10 1/4 in centre-to-centre vertically; the missed step is confirming the surface is flat so the 11 13/16 in tall bracket swivels without binding.
What maintenance or replacement will the stainless swivel bracket need over time?
Inspect the four 1/2 in mounting bolts and the swivel pivot annually; retorque bolts if vibration loosens them and lubricate the pivot with a light marine-grade grease to prevent corrosion-induced stiffness.
What limit appears first when the bracket is used continuously on a service truck?
The 10 1/4 in centre-to-centre hole pattern fixes the leverage arm, so sustained vibration on a truck bed will fatigue the 1/2 in fasteners before the stainless base or swivel mechanism yields.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
