SPEEDAIRE
SPEEDAIRE D5040 Double Rear Clevis 40 mm Steel
A 40 mm bore double rear clevis mount in steel with 38 mm hole centres and 56 mm overall length, compatible with SMC C95 and C96 series and supplied with screws
- Double rear clevis for secure rear mounting
- Fits 40 mm bore cylinders for precise alignment
- 38 mm hole centre spacing matches SMC C95 and C96 series
- 56 mm overall length keeps assembly compact
- Steel body with included screws for immediate installation
SPEEDAIRE D5040 Double Rear Clevis
This SPEEDAIRE D5040 double rear clevis mounts to the rear of compatible cylinders using a clevis mount type. It suits pneumatic systems requiring a 40 mm bore diameter and metric mounting pattern. Maintenance teams and machine builders use it to secure SMC C95 and C96 series actuators. The steel body provides structural rigidity for repeated cycling.
Thermals Noise and Power Draw
As a passive steel mounting bracket, this clevis generates no heat, produces no audible noise and draws no electrical power during operation. It transmits mechanical force between the cylinder rear cap and the machine frame without active components. Ambient temperature limits depend on the cylinder and seal specifications, not the bracket itself.
Sustained Load Behaviour
Under continuous cycling the steel body maintains dimensional stability and resists deformation at the 38 mm mount hole centres. The 56 mm overall length keeps the pivot point fixed relative to the cylinder centreline. Included screws clamp the halves together to prevent loosening over extended duty cycles. Compatibility remains limited to the stated SMC series and 40 mm bore size.
Highlights
- Double rear clevis for secure rear mounting
- Fits 40 mm bore cylinders for precise alignment
- 38 mm hole centre spacing matches SMC C95 and C96 series
- 56 mm overall length keeps assembly compact
- Steel body with included screws for immediate installation
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How do I install the SPEEDAIRE D5040 double rear clevis on a 40 mm bore cylinder, and what alignment step is often missed?
Bolt the clevis to the rear mount using the included screws, ensuring the 38 mm center-to-center hole spacing matches the cylinder's rear lug pattern; the step often missed is verifying the 56 mm overall length clears adjacent components before final tightening.
What maintenance or replacement will the SPEEDAIRE D5040 steel clevis need over time?
Inspect the steel body and pin holes regularly for wear, corrosion, or elongation; replace the clevis if the 38 mm mounting holes show ovality or if the 40 mm bore compatibility is compromised by deformation.
What is the first limit that appears when the SPEEDAIRE D5040 clevis sees sustained cyclic loading?
The 38 mm center-to-center mounting holes are the primary stress concentrators; under sustained use they typically elongate first, causing play between the clevis and the SMC C95 or C96 series cylinder rear lugs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
