SPEEDAIRE
SPEEDAIRE 30E695 Coupler Body, Hose Barb 1/2 in, Steel
Steel hose barb coupler body with 1/2 in male fitting, nitrile seal and poppet valve rated 300 psi at 70°F and 1,840.6 l/min flow
- Rapid tool-free hose changes with sleeve-locking socket
- Steel construction with zinc plating resists corrosion in air lines
- Nitrile seal handles -40 °F to 150 °F operating range
- 1 840.6 L/min flow capacity at 300 psi rating
- Industrial interchange design fits standard 1/2 in hose barbs
SPEEDAIRE 30E695 Coupler Body
The SPEEDAIRE 30E695 is a steel coupler body with a zinc-plated finish designed for compressed air or fluid transfer lines. It features a 1/2 in hose barb connection for tool-free, rapid connection and disconnection of hoses or equipment. The coupling component is a socket with a sleeve locking mechanism that uses nitrile seals to help prevent leaks.
Upgrading from worn or leaking couplers
This coupler replaces damaged or inefficient fittings that cause pressure loss or require tools for hose changes. The jump is worth it when a poppet valve is needed to control flow automatically upon disconnection. It suits systems requiring a maximum flow rate of 1,840.6 liters per minute and a rated working pressure of 300 psi at 70°F.
Integrating into pneumatic systems
The male hose barb fits hoses with a 1/2 in inner diameter and connects to compatible industrial interchange plug profiles. The nitrile seal material supports an operating temperature range from -40°F to 150°F. Its steel construction withstands demanding shop environments while the sleeve lock secures the connection during operation.
Highlights
- Rapid tool-free hose changes with sleeve-locking socket
- Steel construction with zinc plating resists corrosion in air lines
- Nitrile seal handles -40 °F to 150 °F operating range
- 1 840.6 L/min flow capacity at 300 psi rating
- Industrial interchange design fits standard 1/2 in hose barbs
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
What hose inner diameter does the 1/2 in hose barb on the SPEEDAIRE 30E695 coupler body accept?
The 1/2 in hose barb is designed for a hose with a 1/2 in inner diameter.
How do you install the SPEEDAIRE 30E695 coupler body, and what step is often missed?
Push the hose onto the barb until fully seated, then secure with a clamp; the step often missed is verifying the clamp is tight enough to prevent the hose from blowing off under 300 psi pressure.
When should the nitrile seal in the SPEEDAIRE 30E695 coupler body be replaced?
Replace the nitrile seal if air leaks appear at the connection, the seal shows cracking from temperatures near -40°F or 150°F, or the poppet valve no longer shuts off flow cleanly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
