We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SPEEDAIRE

SPEEDAIRE 2YNL8 Exhaust Muffler 0.125 in NPT

SKU CH-D90D-H3G52

Removes oil mist from exhaust air with a 0.9 micron filter, handling 160 cfm at up to 300 psi and 160 °F through a 0.125 in NPT inlet

  • Removes oil mist down to 0.9 micron filter rating
  • Handles up to 160 cfm maximum flow rate
  • Withstands 300 psi maximum operating pressure
  • Operates up to 160 °F maximum temperature
  • Connects via 0.125 in NPT inlet

Exhaust Muffler for Compressors

The SPEEDAIRE 2YNL8 exhaust muffler fits air compressors and vacuum pumps with a 0.125 in NPT inlet. It removes oil mist from exhaust air at a 0.9 micron filter rating. The aluminum and polypropylene body handles fluid temperatures up to 160 Degrees F. This new unit installs directly on compatible equipment.

Interface and Pressure Limits

The 1/8 in tube inlet accepts a maximum flow rate of 160 cfm. Maximum operating pressure is rated at 300 psi. Systems exceeding either limit cannot use this muffler safely. Buyers needing higher flow or pressure must select a different model.

Oil Mist Filtration Rating

The 0.9 micron filter rating determines whether this muffler meets your air quality requirement. It captures fine oil mist from exhaust air before discharge. Applications requiring finer particle removal or different filtration media will need an alternative solution.

Highlights

  • Removes oil mist down to 0.9 micron filter rating
  • Handles up to 160 cfm maximum flow rate
  • Withstands 300 psi maximum operating pressure
  • Operates up to 160 °F maximum temperature
  • Connects via 0.125 in NPT inlet

Specifications

BrandSPEEDAIRE

Questions about this item

Which filter rating should I choose for oil-mist removal?

The muffler filters oil mist down to 0.9 micron, capturing fine aerosol before it leaves the exhaust port.

What does the 160 cfm flow rating mean once the muffler is installed?

It indicates the maximum exhaust volume the muffler can pass without excessive back-pressure on the compressor.

How does the 0.125 in NPT connection limit the installation?

The 1/8-inch NPT thread fits directly onto a matching compressor exhaust port; larger ports would require an adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.