SPEEDAIRE
SPEEDAIRE 2YNL6 Desiccant Air Dryer 5-Stage 30 cfm 1/2 in NPT
Five-stage desiccant dryer delivers ISO Class 2 air at 30 cfm through 1/2 in NPT ports with a -40 °F dew point
- ISO Class 2 dew point -40 °F for critical dry air
- Five-stage filtration down to 0.01 micron removes oil and particles
- 30 cfm at 250 psi suits demanding pneumatic tools
- Metal bowls hold 9 oz and 128 oz desiccant for long service
- 1/2 in NPT inlet and outlet fit standard shop piping
Product Identity
The SPEEDAIRE 2YNL6 is a 5-stage desiccant air dryer rated for 30 cfm at 250 psi maximum operating pressure. It delivers ISO Class 2 air quality with a -40 Degrees F dew point for applications requiring dry compressed air.
Installation Checklist
Verify your system uses 1/2 in NPT connections at both inlet and outlet to match the dryer ports. Confirm the available mounting footprint accommodates the 15 1/2 in length and 18 1/4 in width dimensions before ordering.
Build & Daily Use
The metal body and metal bowls hold 9 oz and 128 oz capacities respectively, using silica gel desiccant across five filtration stages rated at 0.01 micron, 3 micron, 5 micron, and 40 micron. An included drain simplifies routine condensate removal during operation.
Highlights
- ISO Class 2 dew point -40 °F for critical dry air
- Five-stage filtration down to 0.01 micron removes oil and particles
- 30 cfm at 250 psi suits demanding pneumatic tools
- Metal bowls hold 9 oz and 128 oz desiccant for long service
- 1/2 in NPT inlet and outlet fit standard shop piping
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
What comes in the box and what must be purchased separately?
The dryer includes a built-in five-stage filter set rated at 0.01, 3, 5 and 40 microns plus a drain valve; desiccant silica gel is pre-installed. Piping, fittings and any mounting hardware are not included.
Which capacity version should I choose for a 30 cfm compressor?
This model is rated for a maximum flow of 30 cfm at 250 psi with a -40 °F dew point; select it when your compressor output matches that flow and pressure.
What does the 30 cfm rating mean once the dryer is installed on my line?
At full rating the unit delivers ISO Class 2 air with a -40 °F pressure dew point while handling up to 30 cfm at 250 psi through 1/2 in NPT ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
