SPEEDAIRE
SPEEDAIRE 22UX58 air compressor 0.42 HP 30 cfm 2000 rpm
Delivers 30 cfm at 80 psi with a 0.42 hp cast-iron air motor running at 2000 rpm
- 42 HP motor delivers 30 cfm for strong pneumatic performance
- 2000 rpm no-load speed gives fast cycle times on the job
- Cast-iron housing resists wear in tough shop environments
- 1/2-inch shaft with keyway fits common tooling directly
- Weighs only 9.92 lb for easy mounting and portability
SPEEDAIRE 22UX58 Air Motor
The SPEEDAIRE 22UX58 is a pneumatic air motor rated at 0.42 hp with a maximum flow rate of 30 cfm. It operates at a no-load speed of 6,000 RPM and a governed speed of 2000 rpm. The unit features a cast iron housing and a 1/2 inch output shaft with a 1 1/8 inch shaft length. It is designed for applications requiring rotary power from a compressed air supply.
Foot-Mounted 1/4 Inch NPT Inlet
This motor uses a foot and hub mount type for secure installation on machinery or fixtures. It requires a compressed air source connected via a 1/4 inch NPT inlet fitting. The motor delivers a maximum torque of 13.5 in-lb at a maximum operating pressure of 80 psi. Rotation is counter-clockwise when viewed from the shaft end. A muffler is included to reduce exhaust noise during operation.
Cast Iron Housing 9.92 lb Weight
The cast iron housing provides durability in industrial environments while the motor weighs 9.92 lb. Grade 40Cr shaft material supports the rated torque output under load. Bearing protection is not applicable on this model, so external lubrication practices should follow standard pneumatic maintenance. Power consumption scales with air pressure and flow demand up to the 30 cfm maximum.
Highlights
- 42 HP motor delivers 30 cfm for strong pneumatic performance
- 2000 rpm no-load speed gives fast cycle times on the job
- Cast-iron housing resists wear in tough shop environments
- 1/2-inch shaft with keyway fits common tooling directly
- Weighs only 9.92 lb for easy mounting and portability
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
How long can the 0.42 HP air motor sustain 80 psi continuous pressure?
The motor delivers 0.42 hp at 2,000 rpm with a 30 cfm maximum flow rate while operating at up to 80 psi.
What noise and heat levels should I expect when running this cast-iron motor all day?
A muffler is included to reduce exhaust noise; the cast-iron housing helps dissipate heat during extended operation.
What fittings and shaft components must I already have to install this foot-mounted motor?
You need a 1/4 in NPT air supply line, a 1/2 in diameter shaft coupling with a 1 1/8 in engagement length, and foot-mount hardware.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
