SPEEDAIRE
SPEEDAIRE 1VEJ3 3/8" 50 ft Nylon Coiled Air Hose 165 PSI Yellow
A 50 ft coiled nylon air hose with brass MNPT fittings rated to 165 PSI at 70°F and a -40 to 176°F range
- Coiled design reduces tangles and saves storage space
- 50 ft length provides extended reach for workshop tasks
- Nylon tube resists abrasion and handles temperatures from -40 to 176 °F
- 165 psi working pressure supports demanding pneumatic tools
- Brass MNPT fittings on both ends ensure secure, leak-free connections
Coiled Nylon Hose for Compressed Air
The SPEEDAIRE 1VEJ3 is a 50 ft coiled air hose with a 3/8 in inside diameter built for workshop and mobile compressor setups. Its nylon tube resists abrasion and stays flexible across a broad temperature span. Brass MNPT fittings on both ends thread directly onto standard couplers without adapters. The bright yellow colour improves visibility on busy floors.
Upgrade from straight PVC or rubber lines
Coiled memory retracts automatically, removing trip hazards and tangles that slow down work around benches or vehicles. The 165 psi rating at 70 F covers most shop compressors, while the -40 to 176 F range keeps the hose pliable in cold bays and hot engine compartments. Switch when you need self-storage and faster changeovers between tools.
50 ft reach with 165 psi headroom
Comfortably runs impact wrenches, nailers and spray guns at typical shop pressures. The 3/8 in bore delivers ample flow for intermittent high-demand tools, though continuous high-volume sanders may starve at full extension. Brass ends resist corrosion but add weight compared with composite fittings.
Highlights
- Coiled design reduces tangles and saves storage space
- 50 ft length provides extended reach for workshop tasks
- Nylon tube resists abrasion and handles temperatures from -40 to 176 °F
- 165 psi working pressure supports demanding pneumatic tools
- Brass MNPT fittings on both ends ensure secure, leak-free connections
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
What thread size do the brass MNPT fittings on the 3/8 in coiled hose use?
Both ends have 3/8 in male NPT brass fittings that thread directly into standard 3/8 in female ports on tools or regulators.
How do I install the hose without twisting the coils, and what step is often missed?
Connect the fixed end first, then let the coil relax before tightening the tool end; skipping the relax step kinks the nylon tube.
When should I replace the nylon tube on this 50 ft yellow coiled assembly?
Replace it if the tube shows cracks, permanent kinks, or leaks at the brass fittings, especially after exposure beyond the -40 to 176 °F range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
