SPEEDAIRE
SPEEDAIRE 10D240 Air Drill 3/8 In Pistol 2000 RPM
A 3/8-inch pistol-grip air drill delivers 2,000 RPM free speed and 5.40 ft-lb torque for industrial fastening tasks
- 3/8 in chuck fits common drill bits
- 2,000 RPM free speed for fast drilling
- 40 ft-lb torque handles tough materials
- 50 CFM average consumption saves compressed air
- Composite housing and handle reduce tool weight to 2 lb
3/8-Inch Pistol Air Drill
The SPEEDAIRE 10D240 is an industrial-grade pneumatic drill built for mechanics and fabricators who need a compact tool for drilling and fastening tasks. Its pistol-grip design and composite housing keep the weight low for extended use on the job site.
90 PSI Operating Pressure Limit
This drill requires a steady 90 psi supply to reach its rated performance. At full load the tool consumes 18.3 CFM, so the compressor and hose must sustain that flow without excessive pressure drop. A minimum 3/8-inch hose is specified to avoid starving the motor.
2,000 RPM Free Speed Capacity
The planetary gear train delivers 2,000 RPM free speed and 5.40 ft-lb of torque for light to medium drilling in metal and wood. Average air consumption during a 15-second run is 3.50 CFM, offering a practical duty cycle for intermittent work. Continuous high-load drilling will exceed the tool's air-supply capacity.
Highlights
- 3/8 in chuck fits common drill bits
- 2,000 RPM free speed for fast drilling
- 40 ft-lb torque handles tough materials
- 50 CFM average consumption saves compressed air
- Composite housing and handle reduce tool weight to 2 lb
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
Which version of the SPEEDAIRE 10D240 air drill should I choose for my application?
The SPEEDAIRE 10D240 is offered as a single 3/8 in pistol-grip model with a 2,000 RPM free speed and 5.40 ft-lb torque rating, so there are no alternative versions or capacities to select from.
What does the 2,000 RPM free speed mean when I am actually drilling?
The 2,000 RPM free speed is the no-load maximum; under load the speed drops while torque rises to the rated 5.40 ft-lb, and the drill consumes 18.3 CFM at full load from a 90 psi supply.
What air supply standard does this drill require and what does it limit in practice?
The drill requires 90 psi operating pressure and a minimum 3/8 in hose; at full load it draws 18.3 CFM, so your compressor and hose must sustain that flow or the tool will lose power.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
