We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 150-foot combined power and video cable with DC and BNC connectors

SPECO TECHNOLOGIES

SPECO TECHNOLOGIES CBL-150BB 150-foot replacement cable for PVS-130/4/PVS-635-4 camera accessory

SKU CH-FY3K-0R8GQ

150-foot combined power and video cable extends camera-to-monitor distance for PVS-130/4 and PVS-635-4 models

  • TypeOther
  • Extends camera-to-monitor distance up to 150 ft
  • Combines power and video in one multi-purpose cable
  • DC and BNC terminated connectors ensure secure connections
  • Compatible with PVS-130/4 and PVS-635-4 cameras
  • Lightweight 2.55 lbs design simplifies installation

150-foot combined power and video cable

The SPECO CBL-150BB extends the connection between compatible cameras and a monitoring station up to 150 feet. It integrates DC power and BNC video into a single black jacket for simpler routing. Designed specifically for the PVS-130/4 and PVS-635-4 models, it replaces the original cable when longer runs are required. Installers gain extra placement flexibility without running separate conductors.

Passive construction with no active electronics

The cable carries power and video signals without built-in amplification or signal conditioning. Its multi-purpose jacket adds approximately 2.55 lbs to the installation weight across the full length. No external power supply or active cooling is involved, so the link remains silent and draws only the camera's normal operating current. Voltage drop over distance follows standard copper conductor behaviour.

Signal integrity over the full 150-foot run

At the maximum specified length the combined cable still delivers both power and composite video to the supported cameras. Extended runs may exhibit gradual video attenuation and DC voltage reduction inherent to the conductor gauge used. The assembly is intended for continuous operation in fixed surveillance installations rather than repeated flexing or mobile deployment. Users planning longer distances should evaluate separate power distribution or signal-boosting options.

Highlights

  • Extends camera-to-monitor distance up to 150 ft
  • Combines power and video in one multi-purpose cable
  • DC and BNC terminated connectors ensure secure connections
  • Compatible with PVS-130/4 and PVS-635-4 cameras
  • Lightweight 2.55 lbs design simplifies installation

Specifications

TypeOther

Questions about this item

How do I connect the CBL-150BB cable to my PVS-130/4 camera, and what step is often missed?

Attach the BNC connector to the camera's video input and the DC plug to its power port; the step often missed is securing both connections firmly so the combined signal carries cleanly over the full 150-foot run.

What part of this cable will need replacement first after long-term outdoor use?

The outer jacket and connector boots degrade from UV exposure and temperature cycling; inspect them annually and replace the cable if cracking or water ingress appears.

At what distance does signal loss become noticeable on this 150-foot combined power-and-video cable?

Video attenuation and voltage drop both increase with length; at the full 150 feet the combined cable reaches the practical limit where picture quality or camera power stability may degrade.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.