We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray PVC pipe nipple, threaded one end, plain other end, 12 inch length

Spears

Spears 892-120 6 in MNPT x 12 in TBE PVC Pipe Nipple Sch 80

SKU CH-X13T-QZEMP

Schedule 80 PVC pipe nipple with male NPT and threaded-bevel ends for 140 psi water lines

  • Handles potable and non-potable water systems
  • Rated for 140 psi maximum operating pressure
  • Operates reliably between 40 and 140 degrees F
  • Schedule 80 PVC construction ensures durability
  • 6 inch MNPT by 12 inch TBE connection

Schedule 80 PVC pipe nipple for pressurised water

This grey Schedule 80 PVC nipple connects two female-threaded fittings in non-potable or potable water systems. It handles a maximum operating pressure of 140 psi and temperatures from 40 to 140 Degrees F. The 12 in overall length suits tight runs where a standard coupling is too short.

Male NPT threads on one end

Side A carries 6 in male NPT threads for direct engagement with a female adapter or valve. The opposite end is a 12 in TBE spigot that slides into a Schedule 80 socket for solvent welding. This mixed connection lets you transition from threaded to glued joints without an extra coupling.

Nominal 6 in size with 5 23/32 in inside diameter

The 6 in nominal bore and 5 23/32 in inside diameter set the flow capacity for the line. Builders who need a larger bore or a different schedule must select another fitting. This nipple is not for compressed air or chemical service beyond the stated water ratings.

Highlights

  • Handles potable and non-potable water systems
  • Rated for 140 psi maximum operating pressure
  • Operates reliably between 40 and 140 degrees F
  • Schedule 80 PVC construction ensures durability
  • 6 inch MNPT by 12 inch TBE connection

Specifications

BrandZORO SELECT

Questions about this item

What does the 140 psi maximum operating pressure cap in practice?

The Schedule 80 PVC nipple is rated for 140 psi at 140 °F, so the pressure limit applies to non-potable or potable water systems operating within the 40 °F to 140 °F temperature range.

What clearance does the 6 1/2 in outside diameter need to fit?

The 6 1/2 in OD requires a matching Schedule 80 socket or threaded fitting with at least that much internal clearance, plus enough pipe run to accommodate the 12 in overall length.

How do I install the MNPT end without cracking the PVC?

Wrap the male threads with PTFE tape, hand-tighten into the female fitting, then turn one to two full turns with a strap wrench — over-torquing splits the Schedule 80 wall.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.