Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00914418BTC
In stock
Spears
Spears 3632R-020C 2 in CPVC Ball Valve
A 2-inch CPVC ball valve with socket connections rated for 235 psi and temperatures from 32 to 190 degrees Fahrenheit
- TypeOther
- Inline CPVC ball valve rated 235 psi CWP
- Safe-T-Shear stem protects system from over-torque damage
- FKM seats and seals resist chemicals up to 190 °F
- Three-piece body allows inline maintenance without pipe cutting
- Tee handle in polypropylene gives firm grip for manual operation
Spears 3632R-020C CPVC Ball Valve
The Spears 3632R-020C is a 2-inch CPVC ball valve designed for inline installation in industrial and commercial piping systems. It uses a standard port design with socket-by-socket connections for solvent welding. The valve handles fluids within a temperature range of 32 to 190 degrees Fahrenheit. It suits engineers and maintenance teams needing reliable flow control for corrosive media.
Three-piece build with Safe-T-Shear stem
The three-piece body construction allows the centre section to be removed for seat replacement or cleaning without cutting the pipe run. A Safe-T-Shear stem design protects the valve body from damage if the handle is over-torqued. Socket connections require solvent cement for a permanent, leak-free joint. The tee handle is moulded from polypropylene for chemical resistance and grip.
Replaces worn inline valves in CPVC systems
This valve serves as a direct replacement for degraded or leaking inline ball valves in existing two-inch CPVC networks. The upgrade is worth it when seals fail, stem shear occurs, or when a three-piece serviceable design is preferred over a union or single-piece body. FKM seats and seals provide broad chemical compatibility for aggressive fluid service.
Highlights
- Inline CPVC ball valve rated 235 psi CWP
- Safe-T-Shear stem protects system from over-torque damage
- FKM seats and seals resist chemicals up to 190 °F
- Three-piece body allows inline maintenance without pipe cutting
- Tee handle in polypropylene gives firm grip for manual operation
Specifications
| Brand | SPEARS |
|---|---|
| Type | Other |
Questions about this item
What pressure does the 2 in CPVC socket connection handle in practice?
The valve is rated for 235 psi cold working pressure, so the socket joint will hold up to that limit when solvent-welded correctly.
What pipe and fitting dimensions must match for a 2 in socket install?
It requires 2 in nominal CPVC pipe and 2 in CPVC socket fittings; the valve body is a 3-piece inline design with socket ends on both sides.
How is the Spears 3632R-020C installed and which step is often missed?
Solvent-cement each socket to the pipe, then tighten the three-piece union nuts; the step people skip is fully seating the pipe to the socket stop before the cement sets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
