Sparkle Power Inc.
Sparkle Power Inc. FSP300-60PLN handheld pcs accessory
300W ATX power supply with 8-pin and 18-pin connectors for handheld PCs
- Delivers 300 W continuous power for stable handheld PC operation
- Active PFC corrects input across 90 to 264 VAC for worldwide compatibility
- Operates reliably from 0 °C to 50 °C under full load
- MTBF rated at 100,000 hours for long service life
- Includes 8-pin and 18-pin connectors for direct motherboard fit
What the product is
The Sparkle Power FSP300-60PLN is a 300 Watt ATX power supply designed for handheld PCs and compatible personal digital assistants. It accepts a full-range 90 to 264 VAC input with active PFC and operates from 0 to 50 degrees Celsius under full load. The unit includes both 8-pin and 18-pin connectors for the target platform.
When the jump is worth it
This supply replaces a failed or undersized original unit in systems that require the specific 8-pin and 18-pin connector combination. The step up is justified when the existing power source cannot sustain 300 Watts continuous output or lacks active power factor correction across the 47 to 63 Hz frequency range.
What to check before ordering
Verify that the device chassis accepts an ATX-form-factor supply and that its motherboard uses the exact 8-pin and 18-pin power headers listed. Confirm the system cooling can handle exhaust heat at up to 50 degrees Celsius ambient and that the AC mains voltage falls within the 90 to 264 VAC rating.
Highlights
- Delivers 300 W continuous power for stable handheld PC operation
- Active PFC corrects input across 90 to 264 VAC for worldwide compatibility
- Operates reliably from 0 °C to 50 °C under full load
- MTBF rated at 100,000 hours for long service life
- Includes 8-pin and 18-pin connectors for direct motherboard fit
Specifications
No published specifications for this item yet.
Questions about this item
What ATX connector pin counts does the FSP300-60PLN provide?
The unit supplies an 8-pin connector and an 18-pin connector for ATX power delivery.
How do I install the power supply and which step is often missed?
Mount it in the chassis with four screws, connect the 8-pin and 18-pin ATX cables, then verify the voltage selector matches your mains supply before powering on.
When should the power supply be replaced based on its rated lifespan?
The MTBF is rated at 100,000 hours; plan replacement once continuous operation approaches that figure or if output voltages drift under load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



