SpanSet
SpanSet 27 ft Ratchet Tie-Down Strap Flat Hook 12000 lb
Polyester ratchet strap with flat-hook ends spans 27 ft and handles a 12,000 lb breaking strength
- TypeHoists, Winches & Rigging
- MaterialHAWA
- 27 ft length gives long reach for large loads
- 4,000 lb working load limit handles heavy cargo safely
- 12,000 lb breaking strength provides strong safety margin
- Polyester webbing resists stretching and weather damage
- Flat steel hooks attach quickly to anchor points
27 ft Ratchet Strap with Flat Hook
This SpanSet tie-down strap is built for securing heavy loads during transport. The 27 ft length provides reach across wide cargo areas, while the 2 in wide polyester webbing handles demanding tension. A steel flat hook connects firmly to anchor points, and the ratchet mechanism allows precise tension control for a secure hold.
Suited for flatbed and trailer tie-down points
The flat hook design fits standard stake pockets, rub rails and flat anchor plates found on commercial trailers. It is not suited for round bars, D-rings or E-track slots that require a wire hook, chain anchor or E-fitting. Buyers needing those connection styles should select a strap with the matching end hardware.
12,000 lb breaking strength
The webbing is rated to a breaking strength of 12,000 lb, with a working load limit of 4,000 lb for regular use. This capacity covers heavy machinery, vehicles and dense pallet loads. Always verify that the anchor points and vehicle structure meet or exceed the applied load before tensioning.
Highlights
- 27 ft length gives long reach for large loads
- 4,000 lb working load limit handles heavy cargo safely
- 12,000 lb breaking strength provides strong safety margin
- Polyester webbing resists stretching and weather damage
- Flat steel hooks attach quickly to anchor points
Specifications
| Brand | Spanset |
|---|---|
| Type | Hoists, Winches & Rigging |
| Material | HAWA |
Questions about this item
Will the 27 ft length reach around my older truck bed and still leave room for the ratchet?
The strap is 27 ft long and 2 in wide, so it wraps large loads; the ratchet mechanism sits at one end and needs only a few inches of clearance to operate.
How can I confirm the 12,000 lb breaking strength is still intact after I tighten the flat hooks?
Inspect the orange polyester webbing for cuts or abrasion, verify the steel flat hooks latch fully, and ensure the ratchet handle locks without slipping under tension.
Does the package include only the ratchet strap with flat hooks or are extra anchor points supplied?
The box contains the 27 ft ratchet tie-down with integrated flat hooks; no additional anchor hardware or soft loops are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
