SOUTHWIRE COMPANY
Southwire 14 AWG THHN Stranded White 100 ft Conduit
14 AWG stranded THHN wire in white, 100 ft spool rated for 600 V with 19-strand conductors and 0.11 in outside diameter
- Color/FinishWhite
- TypeWire & Cable Staples
- Length3.500
- 14 AWG THHN rated for 600 V circuits
- 19-strand copper conductor bends easily in conduit
- White PVC insulation identifies neutral at a glance
- 100 ft spool covers long runs without splices
- 11 in outside diameter fits standard conduit sizing
Single-conductor building wire
Southwire 14 AWG THHN stranded wire in white is supplied on a 100 ft spool for conduit installation in residential and light-commercial circuits. The PVC-insulated conductor carries a 600 V rating and is listed for use in dry or damp locations.
Stranded 19-wire construction
The conductor uses 19 individual strands to give a nominal outside diameter of .11 in, making it easier to pull through bends and junction boxes than solid alternatives while maintaining the same ampacity for 14 AWG branch circuits.
Spool packaging simplifies handling
The wire ships on a spool that pays out cleanly and stores without tangling, so electricians can cut exact lengths on site and keep the remainder organised for the next job.
Highlights
- 14 AWG THHN rated for 600 V circuits
- 19-strand copper conductor bends easily in conduit
- White PVC insulation identifies neutral at a glance
- 100 ft spool covers long runs without splices
- 11 in outside diameter fits standard conduit sizing
Specifications
| Brand | Southwire |
|---|---|
| Color/Finish | White |
| Type | Wire & Cable Staples |
| Length | 3.500 |
Questions about this item
How far does the 100 ft spool of 14 AWG THHN reach in a typical run?
The spool contains 100 ft of stranded 14 AWG THHN wire, suitable for standard 600 V branch circuits and rated for conduit installation.
What does the 600 V rating on this THHN wire allow in practice?
The insulation is rated for 600 V, so the wire can be used in residential and light-commercial circuits up to that voltage when installed in approved conduit.
What size hole or knockout does the 0.11 in outside diameter need?
With a nominal 0.11 in outside diameter, the single 19-strand conductor fits through standard 1/2 in conduit bodies and knockouts without forcing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



