SOURCEPRO
SOURCEPRO 3.5 mm 4 Pole Aux Cable 1.5 m
A 1.5 m four-pole 3.5 mm male-to-male audio cable with gold-plated connectors for stereo and microphone signals
- Connector TypeUSB A to USB A
- 4-pole design carries stereo audio and microphone signals through one 3.5 mm plug
- Gold-plated connectors resist corrosion for reliable contact over time
- 5 m length gives flexibility to reach car stereos or desktop speakers
- Male-to-male 3.5 mm plugs connect phones, tablets or laptops directly to aux inputs
- Simple plug-and-play cable expands audio options without extra adapters
What this cable does
The SourcePro 3.5 mm 4 Pole Aux Cable 1.5 m connects two devices that each have a 3.5 mm 4 pole socket. Gold-plated tips carry stereo audio and a microphone signal in a single cord. The 1.5 m length bridges a typical gap between a phone and a car stereo or desktop speakers.
Who it suits and who it does not
It suits anyone linking a headset or portable player to an aux input that accepts a four-pole plug. Buyers whose equipment uses separate headphone and microphone jacks, or devices that only support three-pole connectors, will not get a working connection with this cable.
Installing and common issues
Plug each 3.5 mm male end firmly into the matching port; no drivers or power are required. The most frequent issue is partial insertion, which leaves one channel or the microphone silent. If audio cuts out, reseat both plugs and check that the host device recognises a four-pole accessory.
Highlights
- 4-pole design carries stereo audio and microphone signals through one 3.5 mm plug
- Gold-plated connectors resist corrosion for reliable contact over time
- 5 m length gives flexibility to reach car stereos or desktop speakers
- Male-to-male 3.5 mm plugs connect phones, tablets or laptops directly to aux inputs
- Simple plug-and-play cable expands audio options without extra adapters
Specifications
| Connector Type | USB A to USB A |
|---|
Questions about this item
What devices must already have a 3.5 mm 4-pole jack for this cable to work?
Both the source and the destination device need a 3.5 mm 4-pole socket; the cable has 3.5 mm male 4-pole plugs on each end.
Will the 1.5 m length reach from a phone in a cup holder to an older car stereo aux input?
At 1.5 m the cable spans the typical distance between a front cup holder and a dashboard aux port in most vehicles.
How can I confirm the gold-plated connectors are making proper contact after plugging in?
Audio plays immediately in stereo with no crackle, and the microphone channel works for calls when the source device supports it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PCI STI-204514H Scan Capable MICR Toner Cartridge 12K Yield
- Printer / Fax - Ton…



