We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polished aluminium 1-inch tantalum dome tweeter pair with inline crossover

SOUNDSTREAM

SOUNDSTREAM TWS.4 1" Tantalum Dome Tweeter car speaker

SKU CH-B9TX-2KXZ3 MPN TWS.4

A 1-inch tantalum dome tweeter rated at 110 W RMS with a built-in 12 dB crossover and 95 dB sensitivity

  • TypeTweeter
  • Speaker SizeTweeter
  • Vehicle TypeAutomotive
  • ColorBlack
  • Woofer Material1" Tantalum Tweeter
  • Frame ConstructionSoundstream TWS.4 Pair of High Powered 1" Microdome Tweeters
  • 110 W RMS handling keeps highs clean at volume
  • 200 W peak capacity absorbs sudden transients
  • 12 dB in-line crossover protects the dome from low frequencies
  • 95 dB SPL delivers loud, detailed treble with less power
  • Dual-mount design fits surface or angled installations cleanly

Automotive 1″ Tantalum Dome Tweeter

The Soundstream TWS.4 is a pair of 1″ tantalum dome tweeters designed for car audio systems that need clear high-frequency reproduction. Each unit handles 110 W RMS and 200 W peak power at 4 Ω impedance. The built-in 12 dB in-line crossover simplifies installation by filtering low frequencies before they reach the dome.

Power handling and frequency limits

With 110 W RMS the tweeters deliver clean output for most component systems, while the 200 W peak rating provides headroom for dynamic passages. The specified response of 5 kHz to 25 kHz covers the critical upper octaves, but output falls off below the crossover point so a separate midrange or woofer is required for full-range sound.

Polished aluminium housing and dual mounting

The tweeters feature a polished aluminium frame that resists corrosion and looks clean on display or behind grilles. Dual-mount hardware allows either surface or angled installation, letting you aim the 95 dB SPL output toward the listening position without extra brackets.

Highlights

  • 110 W RMS handling keeps highs clean at volume
  • 200 W peak capacity absorbs sudden transients
  • 12 dB in-line crossover protects the dome from low frequencies
  • 95 dB SPL delivers loud, detailed treble with less power
  • Dual-mount design fits surface or angled installations cleanly

Specifications

BrandSOUNDSTREAM
SeriesTWS
TypeTweeter
Speaker SizeTweeter
ModelTWS.4
Vehicle TypeAutomotive
ColorBlack
Woofer Material1" Tantalum Tweeter
Frame ConstructionSoundstream TWS.4 Pair of High Powered 1" Microdome Tweeters
Part NumberTWS.4
Peak PowerNominal Power: 110 Watt RMS
RMS PowerPeak Power: 200W
Frequency Response5 Hz
Impedance4 Ohm
Features1" PEI Dome neodymium tweeter

Questions about this item

Will the 4 ohm impedance of the TWS.4 tweeters match my older 4 ohm component system?

Yes, the 4 ohm impedance is standard for car audio and will integrate directly with existing 4 ohm crossovers or amplifiers without wiring changes.

How can I verify the built-in 12 dB crossover is functioning after I mount the tweeters?

Play a frequency sweep from 5 kHz to 25 kHz and listen for smooth output up to the 25 kHz limit; the 95 dB SPL rating means they should be clearly audible at moderate volume.

Does the box include the in-line crossovers and hardware for both surface and angle mounting?

The pair ships with built-in 12 dB in-line crossovers on each tweeter and dual-mount hardware for surface or angle installation; no separate crossover purchase is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.