We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Sony

Sony XS162GS GS Series 6.5" 2-Way Component Speakers 45W RMS

SKU CH-BXRN-FZ1AT

6.5-inch two-way component speakers with composite polypropylene woofer, silk soft-dome tweeter, 45 watts RMS power handling and 89 dB sensitivity

  • TypeComponent Speakers
  • Speaker Size6.5"
  • Features6 1/2" (16 cm) 2-way component speakers
  • 5" 2-way component design delivers full-range sound from separate woofer and tweeter
  • Composite polypropylene cone woofer with foam rubber surround produces deep, controlled bass
  • Silk soft-dome tweeter with neodymium magnet reproduces clear, detailed highs up to 24,000 Hz
  • 45 W RMS power handling and 89 dB sensitivity provide strong output from factory or aftermarket amplifiers
  • Progressive height rate spider and phase plug dynamic air diffuser improve cone control and airflow

GS Series 6.5" Component System

The Sony XS162GS is a 2-way component speaker set built for car-audio enthusiasts who want clearer separation between mid-bass and treble than coaxial designs allow. It fits standard 6.5-inch openings and includes a dedicated silk soft-dome tweeter for precise imaging on the dash or door pillars.

Composite Cone and Silk Tweeter Build

A 16 cm composite polypropylene woofer with foam rubber surround handles 45 watts RMS and 250 watts peak while the 2.0 cm neodymium-magnet tweeter uses a silk diaphragm for smooth highs. The progressive height rate spider and phase plug dynamic air diffuser keep cone motion controlled, and the 4-ohm impedance suits most aftermarket amplifiers without special wiring.

45 Hz to 24,000 Hz Frequency Range

The system reaches 45 Hz at the low end and extends to 24,000 Hz on top, so the deepest bass notes and highest harmonics stay audible within the same driver pair. Sensitivity of 89 dB at one watt and one metre means moderate amplifier power fills a cabin, though listeners chasing sub-bass authority below 45 Hz will need a separate subwoofer to complete the range.

Highlights

  • 5" 2-way component design delivers full-range sound from separate woofer and tweeter
  • Composite polypropylene cone woofer with foam rubber surround produces deep, controlled bass
  • Silk soft-dome tweeter with neodymium magnet reproduces clear, detailed highs up to 24,000 Hz
  • 45 W RMS power handling and 89 dB sensitivity provide strong output from factory or aftermarket amplifiers
  • Progressive height rate spider and phase plug dynamic air diffuser improve cone control and airflow

Specifications

BrandSONY
TypeComponent Speakers
Speaker Size6.5"
Features6 1/2" (16 cm) 2-way component speakers

Questions about this item

What power does the 4-ohm impedance limit these speakers to with a typical head unit?

The 4-ohm impedance and 45-watt RMS rating mean a standard head unit will deliver its rated power cleanly; an external amplifier can supply up to 45 watts RMS per channel for full output.

What cut-out diameter and mounting depth do the 6.5-inch woofers need?

The 16 cm (6.5-inch) woofers require a standard 6.5-inch cut-out; check your door panel depth against the speaker frame to ensure the composite polypropylene cone and foam rubber surround clear the window mechanism.

How do I wire the included crossover so the 13/16-inch silk tweeter and woofer sum correctly?

Connect the amplifier or head-unit outputs to the crossover input terminals, then run the marked tweeter and woofer leads to each driver; reversing the polarity on either lead is the common mistake that collapses the soundstage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.