Sony
Sony VW80 LMPH201 200W projector lamp
Genuine 200W UHP replacement lamp module with 2,000-hour life for Sony projectors
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 Hrs.
- Ready-to-install module with bulb and housing
- 200W UHP lamp rated for 2000 hours
- Manufactured to ISO9001 quality standards
- Tested for beam performance and run-time
- Genuine compatible replacement for Sony VW80
Sony VW80 LMPH201 200W projector lamp
This genuine compatible replacement lamp module fits Sony VW80 projectors. It arrives as a fully assembled 200W UHP bulb inside its housing, so installation is straightforward. The unit is manufactured to ISO9001 standards and undergoes checks for beam performance, ignition, voltage, connections and run-time.
Home cinema owners and installers replacing
The module suits anyone needing a direct 200W replacement for the original LMPH201 lamp. Buyers who want a bare bulb without the housing, or who need a different wattage or form factor for another projector model, should look at a different part.
Rated lamp life of 2,000 hours
This figure determines how long the lamp is expected to last before brightness drops to half its initial level. A 2,000-hour rating matches the original specification for the VW80 series, so you can plan replacement intervals around typical usage patterns.
Highlights
- Ready-to-install module with bulb and housing
- 200W UHP lamp rated for 2000 hours
- Manufactured to ISO9001 quality standards
- Tested for beam performance and run-time
- Genuine compatible replacement for Sony VW80
Specifications
| Brand | Sony |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Sony projector model does the LMPH201 lamp module fit?
The LMPH201 module is built for the Sony VW80 projector and matches the original housing and connector layout.
Will the 200W UHP bulb run in a projector that originally used a lower-wattage lamp?
The 200W rating matches the VW80 specification; using it in a projector designed for a different wattage can cause overheating or shutdown.
How can I confirm the new lamp is operating correctly after installation?
Reset the lamp timer in the VW80 menu, then verify the projector reports zero hours and the image reaches full brightness within the normal warm-up period.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PCI STI-204514H Scan Capable MICR Toner Cartridge 12K Yield
- Printer / Fax - Ton…



