We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sony VPL-VW11 projector lamp module in housing, new 200W UHP bulb installed

Sony

Sony VPL-VW11 OEM Replacement Projector Lamp 200W

SKU CH-1801-J7C3H

OEM replacement lamp module with a 200W UHP bulb and housing, rated for 2,000 hours of use

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module saves setup time
  • Ushio UHP 200W bulb delivers specified brightness
  • 2,000-hour rated life supports extended use
  • Built to ISO 9001 quality standards
  • Genuine OEM component ensures projector compatibility

OEM replacement lamp for Sony VPL-VW11

The Sony VPL-VW11 OEM replacement lamp delivers a 200W UHP bulb pre-assembled in its housing. It is built for owners of the VPL-VW11 projector who need a direct swap without extra assembly steps. The module arrives ready to install, matching the original lamp form factor.

Restores original brightness after 2,000 hours

This lamp replaces a dimmed or expired module once the projector reaches its rated 2,000-hour service life. The upgrade is worth it when image brightness drops noticeably or the projector signals a lamp warning. Installing a fresh OEM unit returns light output to factory specifications for continued home-cinema viewing.

Verify the projector model is exactly VPL-VW11

Confirm your projector carries the VPL-VW11 designation before ordering, as the housing and connector are model-specific. Check that the existing lamp module matches the LMPP201 part reference shown in the manual. Ensure the projector is powered off and cooled before attempting the swap.

Highlights

  • Ready-to-install module saves setup time
  • Ushio UHP 200W bulb delivers specified brightness
  • 2,000-hour rated life supports extended use
  • Built to ISO 9001 quality standards
  • Genuine OEM component ensures projector compatibility

Specifications

BrandSony
TypeProjector Lamp
Wattage200W
Lamp Life2,000 Hrs.

Questions about this item

What projector model does the LMPP201 lamp module fit?

The LMPP201 module is built for the Sony VPL-VW11 projector and ships as a complete bulb-and-housing unit.

How is the LMPP201 lamp installed and what step do people miss?

Power off and cool the projector, remove the lamp cover, release the retaining screws, slide the old module out, insert the new LMPP201 until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often forgotten.

When will the Ushio 200W bulb need replacement?

The Ushio UHP 200W bulb is rated for 2,000 hours of use; plan to replace the module once the projector's lamp-hour counter approaches that figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.