Sony
Sony VPL-FX40 LMPF270 275W projector lamp
275 W replacement lamp module with a new Ushio NSH bulb and housing, ready for easy installation in Sony projectors and rated for 2,000 hours of use
- TypeProjector Lamp
- Wattage275W
- Lamp Life2,000 Hrs.
- 275W Ushio NSH bulb delivers bright, reliable projection
- 2,000-hour rated lamp life reduces replacement frequency
- Fully assembled housing enables quick, tool-free installation
- Genuine OEM components ensure consistent colour and ignition performance
- Manufactured to ISO 9001 quality standards for dependable operation
Ready-to-install lamp module
The Sony VPL-FX40 LMPF270 is a complete 275W projector lamp module that includes a new Ushio NSH bulb pre-assembled in its housing. It is designed for users who need a direct replacement without the hassle of fitting a bare bulb into an old cage.
Replaces a dimmed or expired original
This module restores brightness when the factory lamp reaches the end of its 2,000-hour rated life or fails earlier. The upgrade is worth it when image quality has faded, the projector warns of lamp end-of-life, or a sudden failure leaves the unit unusable.
Rated for 2,000 hours of operation
At the specified 275W the lamp delivers its full output for the rated 2,000 hours under normal use. Beyond that point brightness drops and reliability cannot be guaranteed, so a second module should be kept on hand for critical installations.
Highlights
- 275W Ushio NSH bulb delivers bright, reliable projection
- 2,000-hour rated lamp life reduces replacement frequency
- Fully assembled housing enables quick, tool-free installation
- Genuine OEM components ensure consistent colour and ignition performance
- Manufactured to ISO 9001 quality standards for dependable operation
Specifications
| Brand | Sony |
|---|---|
| Type | Projector Lamp |
| Wattage | 275W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Sony projector models accept the LMPF270 lamp module?
The LMPF270 module is built for the Sony VPL-FX40 projector and fits directly into its lamp compartment without adapters.
What is the correct way to seat the LMPF270 housing during installation?
Align the housing guide rails with the projector slots, press firmly until the latch clicks, then tighten the retaining screw to secure the electrical contact.
How many hours of use can I expect from the 275W Ushio NSH bulb before replacement?
The lamp is rated for 2,000 hours of operation; plan a replacement when the projector warning appears or brightness drops noticeably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



