Sony
Sony SA-RS3S Wireless Rear Speakers for HT-A7000/HT-A5000 (Pair)
Wireless rear speakers add surround sound to compatible Sony soundbars with a 6.5" driver and 50 watts of power
- TypeSurround/Rear Channel Speakers
- ChannelsSubwoofer Only
- Sold AsSystem
- Speakers ConfigurationWireless Rear Speakers
- Driver Units6.5"
- Power Rating50 watts
- Wireless rear speakers pair automatically with HT-A7000/HT-A5000 soundbars
- 5 inch drivers deliver 50 watts for cinematic surround sound
- 27 Hz to 120 kHz frequency response covers deep bass to high detail
- Compact 120 mm cubes mount on walls for clean placement
- 4 ohm nominal impedance matches soundbar amplifier output
Sony SA-RS3S Wireless Rear Speakers
The Sony SA-RS3S wireless rear speakers are designed exclusively for the HT-A7000 and HT-A5000 soundbars to expand a home-theatre system with dedicated surround channels. They suit owners of those soundbars who want immersive rear audio without running cables across the room. Buyers who do not own a compatible Sony soundbar cannot use this pair.
Wireless pairing and wall mounting
Setup is straightforward because the speakers connect directly to the supported soundbar wirelessly right out of the box, removing the need for long speaker wires. Each unit requires a corded electric power supply, so a mains socket must be available near the chosen rear position. Wall-mount capability allows a clean installation, though the hardware for mounting is not detailed in the supplied data.
6.5-inch driver with 50 W power rating
The single specification that determines suitability is the 6.5-inch driver rated at 50 watts, which defines the output capability and low-frequency reach down to 27 Hz for the rear channels. This power level matches the design intent for the HT-A7000 and HT-A5000 systems. If a higher rear-channel power figure is required, this pair will not meet that need.
Highlights
- Wireless rear speakers pair automatically with HT-A7000/HT-A5000 soundbars
- 5 inch drivers deliver 50 watts for cinematic surround sound
- 27 Hz to 120 kHz frequency response covers deep bass to high detail
- Compact 120 mm cubes mount on walls for clean placement
- 4 ohm nominal impedance matches soundbar amplifier output
Specifications
| Brand | SONY |
|---|---|
| Series | SA-RS3S |
| Model | ARIA926DW |
| Part Number | SA-RS3S |
| Type | Surround/Rear Channel Speakers |
| Channels | Subwoofer Only |
| Sold As | System |
| Speakers Configuration | Wireless Rear Speakers |
| Driver Units | 6.5" |
| Power Rating | 50 watts |
| Frequency Response | 27Hz - 120kHz |
| Nominal Impedance | 4 Ohms |
| Connectors | Yes |
| Power Supply | Corded Electric |
| Color | Black |
| Features | SA-RS3S, Active, Wireless, dynamic_driver, indoor |
| Dimensions & Weight | 120×120×25mm 4.72*4.72*0.98in |
Questions about this item
How can I confirm the SA-RS3S rear speakers are properly connected to my HT-A7000 soundbar after setup?
The speakers automatically establish a direct wireless link with the HT-A7000 or HT-A5000 soundbar right out of the box; when paired successfully you will hear cinematic surround sound from the rear channels during playback.
What comes in the box with the SA-RS3S pair and what must I purchase separately?
The package includes the two wireless rear speakers with their corded electric power supplies; the HT-A7000 or HT-A5000 soundbar itself is sold separately and is required for operation.
Should I choose the SA-RS3S for my HT-A5000 or is there a different rear-speaker model for that soundbar?
The SA-RS3S is specifically designed to pair with both the HT-A7000 and HT-A5000 soundbars, so this single model works with either system.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



