We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sony Mobile VGA SVGA cable with blue connectors

Sony Mobile

Sony Mobile VGA SVGA Cable

SKU CH-Q488-3N7H2

Connects four video sources to nine displays plus a local output for 3x3 video walls up to 4K at 30 Hz

  • 4 source devices connect to 9 displays via 1 HDMI 1 DisplayPort 1 USB-C and 1 VGA
  • Create a 3x3 video wall with multi-level cascading up to 10x10 configurations
  • Supports 4K at 30Hz on USB-C DisplayPort and HDMI inputs with HDCP 2.2 compliance
  • Switch sources using front panel remote RS232 or TCP/IP control with OSD splicing modes
  • Extract SPDIF and analog audio for external speakers while managing EDID with 4K30Hz and 1080p defaults

Sony Mobile VGA Cable

This Sony Mobile VGA SVGA cable is a new video interconnect for analogue displays and projectors. It carries RGBHV signals between a source device and a monitor that uses a 15-pin D-sub connector. The cable suits offices, classrooms and legacy workstations that still rely on VGA ports. No active electronics or signal conversion are built into this passive assembly.

Users with analogue VGA outputs and matching inputs

This cable fits builders connecting a PC, laptop or KVM switch to a VGA monitor or projector. It does not suit installations that require digital HDMI, DisplayPort or USB-C signalling. Buyers who need audio transmission, 4K resolution or HDCP support should look at a different interface. The product is a single passive cable, not a video wall processor or multi-display controller.

Analogue VGA 15-pin connectivity

The deciding specification is the 15-pin D-sub VGA interface, which limits the signal to analogue RGBHV without embedded audio or content protection. Maximum supported resolution depends on the source and display hardware, not on the cable alone. Verify that both endpoints provide a standard VGA port before purchase. This part provides the physical link for that legacy connection.

Highlights

  • 4 source devices connect to 9 displays via 1 HDMI 1 DisplayPort 1 USB-C and 1 VGA
  • Create a 3x3 video wall with multi-level cascading up to 10x10 configurations
  • Supports 4K at 30Hz on USB-C DisplayPort and HDMI inputs with HDCP 2.2 compliance
  • Switch sources using front panel remote RS232 or TCP/IP control with OSD splicing modes
  • Extract SPDIF and analog audio for external speakers while managing EDID with 4K30Hz and 1080p defaults

Specifications

No published specifications for this item yet.

Questions about this item

What source connectors must my devices have to plug into the 3x3 video wall processor?

The processor accepts one HDMI, one DisplayPort, one USB-C and one VGA source, so your devices need at least one of those four outputs.

Will my 1080p VGA source work alongside 4K HDMI and DisplayPort inputs on the same wall?

Yes — the VGA input is limited to 1080p while the HDMI, DisplayPort and USB-C inputs each support up to 4K at 30 Hz, and the processor switches between them seamlessly.

How can I confirm the video wall is displaying the correct layout after I connect the nine screens?

Use the on-screen display to choose from more than 10 splicing modes and verify the 3x3 arrangement with a single click; the OSD also lets you adjust monitor edges for alignment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in VGA / SVGA Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.