We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sony LMPH160 projector lamp module with 200W Philips UHP bulb in housing

Sony

Sony LMPH160 OEM Philips projector lamp 200W

SKU CH-EPDN-QXSV7

A ready-to-install 200W projector lamp module rated for 2,000 to 3,000 hours

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 (High Brightness) - 3,000 (Normal) Hrs.
  • Ready-to-install module with Philips 200W UHP bulb
  • 2,000 hours high-brightness life, 3,000 hours normal
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition and voltage
  • 180-day warranty included with purchase

Direct-fit replacement module

The Sony LMPH160 module arrives with a new Philips UHP 200W bulb already seated in its housing, so it installs in one step without handling a bare lamp. It is built for owners of compatible Sony projectors who need a factory-spec light source that restores original brightness and colour balance. The unit is new and manufactured to ISO9001 quality standards.

Restores original output after 2000–3000 hours

The lamp is rated for 2000 hours at high brightness or 3000 hours in normal mode, matching the figures of the original module. When image dimming, colour shift or a replacement warning appears, this module returns the projector to its launch performance. It is not suited for users who need a higher-wattage or longer-life alternative than the 200W design provides.

Fits the existing lamp cavity and power supply

Because the bulb and housing are pre-assembled, the module slides into the projector’s lamp compartment and connects to the existing ballast without adapters or wiring changes. No extra tools, firmware updates or cooling modifications are required. Buyers whose projector uses a different lamp code or wattage cannot use this module.

Highlights

  • Ready-to-install module with Philips 200W UHP bulb
  • 2,000 hours high-brightness life, 3,000 hours normal
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition and voltage
  • 180-day warranty included with purchase

Specifications

BrandSony
TypeProjector Lamp
Wattage200W
Lamp Life2,000 (High Brightness) - 3,000 (Normal) Hrs.

Questions about this item

Does the LMPH160 housing match the original Sony projector lamp slot?

Yes, the module is a fully assembled bulb and housing built to the original Sony LMPH160 form factor so it seats directly in the projector lamp compartment without adapters.

What is the installation step users most often miss when fitting this lamp?

After sliding the LMPH160 module into the projector, the lamp timer in the projector menu must be reset to zero; otherwise the projector will still show the old lamp hours and may shut down early.

When should I expect to replace the Philips UHP 200W bulb inside this housing?

The lamp is rated for 2,000 hours in High Brightness mode or 3,000 hours in Normal mode; plan a replacement when the projector lamp timer approaches those figures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.