Sony
Sony LMPC132 132W projector lamp
Genuine 132W replacement lamp module with 2,000-hour normal and 3,000-hour economy life for Sony projectors
- TypeProjector Lamp
- Wattage132W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Genuine Sony replacement lamp ensures exact fit
- 132W UHP bulb delivers bright, consistent output
- 2,000 hours normal life, 3,000 hours economy
- Pre-assembled housing allows quick, tool-free installation
- Manufactured to ISO 9001 quality standards
What this lamp replaces
The Sony LMPC132 is a 132W UHP projector lamp module supplied as a fully assembled bulb and housing. It fits Sony projectors that specify the LMPC132 part number and is ready for direct installation without additional tools. Buyers who need a different wattage or a bare bulb without housing should verify their projector's service manual first.
Heat output and rated life
At 132W the lamp draws a constant 132 watts during operation and produces heat consistent with that power level. Rated life is 2000 hours in normal mode and 3000 hours in economy mode. The lamp meets ISO 9001 manufacturing standards and undergoes checks for ignition, voltage stability and run-time before shipping.
What the module includes
Each unit arrives as a complete lamp-and-housing assembly, eliminating the need to handle a bare bulb or reuse the old cage. The supplier provides a 90-day warranty and a 30-day return window, so a defective module can be replaced or returned within those periods.
Highlights
- Genuine Sony replacement lamp ensures exact fit
- 132W UHP bulb delivers bright, consistent output
- 2,000 hours normal life, 3,000 hours economy
- Pre-assembled housing allows quick, tool-free installation
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | Sony |
|---|---|
| Type | Projector Lamp |
| Wattage | 132W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
How do I install the LMPC132 lamp module and what step is often missed?
The unit ships as a complete housing with the 132W bulb already fitted, so you only need to open the projector's lamp door, remove the old module, slide this one in until it clicks, and then reset the lamp timer in the menu — skipping the timer reset is the step most people forget.
What maintenance or replacement will the LMPC132 need later?
The lamp itself is the only consumable; rated life is 2,000 hours in Normal mode or 3,000 hours in Economy mode, after which you replace the entire module again — no separate filter or bulb-only change is required.
What limit appears first during long sessions with the LMPC132?
The 132W UHP bulb reaches its rated hour limit before any other component wears out, so the 2,000-hour Normal or 3,000-hour Economy figure is the practical ceiling for continuous use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



