We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Jaspertronics OEM lamp module with Philips bulb inside for Sony KDS-55A2020

Sony

Sony KDS-55A2020 DLP Replacement Lamp PHI387 100/120W 1.3 E8

SKU CH-53V3-JF8FE

A replacement DLP lamp and housing with a 100/120 W Philips bulb rated for 6,000 hours

  • TypeProject Lamp
  • Weight0.9990
  • Compatible with Sony KDS-55A2020 rear-projection TV
  • Philips PHI387 bulb delivers 100/120 W brightness
  • 6 000-hour rated lamp life reduces replacements
  • Complete housing assembly installs without extra parts
  • Lightweight 0.999 kg module eases handling

Compatible Sony model

This replacement lamp fits the Sony KDS-55A2020 rear-projection television. It ships as a complete housing with the Philips PHI387 bulb already installed. The unit is new and rated for 6,000 hours of operation.

Power rating and lamp code

The lamp runs at 100/120W with a 1.3 E8 specification and carries the PHI387 identifier. These figures define the electrical and optical limits of the original design. No other wattage or lamp code is supported by this housing.

Installation notes

The assembly arrives pre-aligned in its cage so no bulb handling is required. Typical failure points are forgetting to reset the TV lamp timer after fitting and not seating the housing latch fully. Allow the set to cool before starting the swap.

Highlights

  • Compatible with Sony KDS-55A2020 rear-projection TV
  • Philips PHI387 bulb delivers 100/120 W brightness
  • 6 000-hour rated lamp life reduces replacements
  • Complete housing assembly installs without extra parts
  • Lightweight 0.999 kg module eases handling

Specifications

BrandJaspertronics
ModelKDS-55A2020-LAMP-UHP
Part NumberKDS-55A2020-LAMP-UHP
TypeProject Lamp
Weight0.9990

Questions about this item

Which lamp version fits the Sony KDS-55A2020 TV?

The Jaspertronics OEM PHI387 100/120W 1.3 E8 lamp and housing is built for the Sony KDS-55A2020 model.

What does the 100/120W rating mean in daily use?

The dual 100/120 watt rating shows the lamp's operating power range inside the TV's light engine.

How does the PHI387 bulb type affect replacement?

The original Philips PHI387 bulb inside the housing matches the factory specification for the KDS-55A2020.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.