We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Sony

Sony KDS-50A3000-LAMP DLP Replacement Lamp

SKU CH-MMR0-JGAX4

Original Osram PVIP lamp and housing restores brightness to the Sony KDS-50A3000 with a 6,000-hour rating and 100-120W 1.0 P22HA specification

  • TypeProject Lamp
  • Weight0.9990
  • Original Osram PVIP lamp restores factory brightness
  • 100-120W 1.0 P22HA rating matches TV spec exactly
  • 6,000-hour rated life supports long viewing sessions
  • 240-day warranty covers early failures
  • 999 kg weight fits KDS-50A3000 housing precisely

Compatible Sony TV Models

This replacement lamp and housing assembly is built for the Sony KDS-50A3000 rear-projection television. It uses an original Osram PVIP light source rated at 100 to 120 watts with a 1.0 P22HA configuration. The unit arrives new and ready to install, restoring the display brightness the TV was designed to deliver.

Who This Suits and Who Should Look Elsewhere

Owners of the KDS-50A3000 who need a direct-fit lamp module with the factory-specified housing will find the correct part here. Buyers who want a bare bulb without the housing, or who need a lamp for any other Sony model, should look elsewhere. The 240-day warranty covers early failures under normal home use.

Deciding Specification — Lamp Power and Type

The critical figure is the 100 to 120 watt 1.0 P22HA lamp type, which must match the original component exactly for proper ignition and colour performance. Using a lamp with a different wattage or base design will prevent the TV from operating correctly. Verify the model number on your existing lamp before ordering.

Highlights

  • Original Osram PVIP lamp restores factory brightness
  • 100-120W 1.0 P22HA rating matches TV spec exactly
  • 6,000-hour rated life supports long viewing sessions
  • 240-day warranty covers early failures
  • 999 kg weight fits KDS-50A3000 housing precisely

Specifications

BrandSony
ModelKDS-50A3000-LAMP
Part NumberKDS-50A3000-LAMP
TypeProject Lamp
Weight0.9990

Questions about this item

What Sony TV model does the KDS-50A3000-LAMP lamp and housing fit?

The lamp and housing is designed for the Sony KDS-50A3000 rear-projection TV.

How is the Osram PVIP lamp module installed in the KDS-50A3000, and what step is often missed?

Remove the TV's lamp cover, slide the housing into the compartment until it seats fully, then secure the retaining screws before replacing the cover.

When will the 100-120W 1.0 P22HA lamp need replacement based on its rated life?

The lamp is rated for 6,000 hours of use; plan a replacement once the TV's lamp timer approaches that figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.