We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sony F-9308-750-0 DLP replacement lamp in black plastic housing

Sony

Sony F-9308-750-0 DLP Replacement Lamp & Housing

SKU CH-1MNK-F94RJ

Replacement lamp and housing with Philips bulb inside for Sony DLP TVs rated at 6,000 hours

  • TypeProject Lamp
  • Weight0.9990
  • OEM lamp and housing fits Sony F-9308-750-0 models
  • Original Philips 379 bulb inside for reliable brightness
  • 100-120W 19.8 specification matches original power rating
  • 6000 hours rated life reduces replacement frequency
  • Lightweight 0.9990 unit simplifies installation

Direct-fit lamp module

This is a new OEM replacement lamp and housing built for Sony rear-projection televisions that use the F-9308-750-0 assembly. It arrives as a complete unit with a Philips bulb already installed, so no separate lamp handling is required. Home-theatre owners and service technicians can swap the old module in minutes and restore full brightness.

Philips 379 100-120 W RP-E 19.8 bulb

The decisive specification is the original Philips 379 lamp rated at 100 to 120 watts with a 19.8 voltage parameter and a 6,000-hour rated life. If the television’s service manual calls for this exact lamp code, the module will match the factory light output and colour balance. A different wattage or bulb code will not strike correctly and can damage the ballast.

Drop-in housing for Sony RPTV chassis

The housing aligns with the existing lamp cage and connector, so the television needs no modification, additional wiring or firmware update. Replacing the module frees the optical engine from dimming and colour shift caused by an aged lamp. Buyers whose set uses a different part number or who require a bare bulb without housing cannot use this assembly.

Highlights

  • OEM lamp and housing fits Sony F-9308-750-0 models
  • Original Philips 379 bulb inside for reliable brightness
  • 100-120W 19.8 specification matches original power rating
  • 6000 hours rated life reduces replacement frequency
  • Lightweight 0.9990 unit simplifies installation

Specifications

BrandJaspertronics
ModelF-9308-750-0-UHP
Part NumberF-9308-750-0-UHP
TypeProject Lamp
Weight0.9990

Questions about this item

What does the 100-120W rating mean for brightness in my Sony TV?

The 100-120W Philips bulb delivers the original light output specified for compatible Sony rear-projection models.

How does the PHI/379 lamp type affect installation?

The PHI/379 designation identifies the exact Philips bulb assembly that fits the original housing without modification.

What physical space does the 0.9990 kg housing require?

The complete lamp and housing unit weighs 0.9990 kg and matches the factory dimensions for direct replacement in listed Sony TVs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.