Sony
Sony EX175 Projector Lamp LMPE211 210W
A 210W replacement projector lamp module with a fully assembled bulb and housing for easy installation, rated for 2,500 hours normal or 4,500 hours economy use
- TypeProjector Lamp
- Wattage210W
- Lamp Life2,500 (Normal) - 4,500 (Economy) Hrs.
- OEM Philips UHP 210W bulb for reliable brightness
- Pre-assembled housing enables quick tool-free installation
- 2,500 hours normal mode extends replacement intervals
- 4,500 hours economy mode lowers long-term cost
- Manufactured to ISO 9001 quality standards
Ready-to-install 210 W lamp module
The Sony EX175 projector lamp (model LMPE211) ships as a complete 210 W bulb-and-housing assembly. It is built to ISO 9001 quality standards and uses a genuine Philips UHP bulb. The module fits directly into compatible Sony projectors without extra tools or alignment steps.
Ideal for owners replacing a worn EX175 lamp
This unit suits anyone whose Sony projector uses the EX175 / LMPE211 lamp and who wants a drop-in replacement with 2,500 hours in normal mode or 4,500 hours in economy mode. It is not for users whose projectors require a different lamp code, a different wattage, or a bare bulb without housing.
Fits the projector’s existing lamp compartment
The pre-assembled housing matches the original form factor, so it slides into the same lamp door and connects to the existing power connector. No wiring changes, firmware updates or additional cooling hardware are needed, freeing the installer to simply swap the module and reset the lamp timer.
Highlights
- OEM Philips UHP 210W bulb for reliable brightness
- Pre-assembled housing enables quick tool-free installation
- 2,500 hours normal mode extends replacement intervals
- 4,500 hours economy mode lowers long-term cost
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | Sony |
|---|---|
| Type | Projector Lamp |
| Wattage | 210W |
| Lamp Life | 2,500 (Normal) - 4,500 (Economy) Hrs. |
Questions about this item
Which Sony projector models accept the LMPE211 lamp module?
The LMPE211 module fits Sony projectors that specify the EX175 lamp; verify your projector's service manual lists EX175 or LMPE211 before ordering.
Does the 210 W UHP bulb draw the same power as the original factory lamp?
Yes, the replacement uses a 210 W Philips UHP bulb, matching the original wattage so the projector's power supply and thermal design remain unchanged.
How can I confirm the lamp is operating correctly after installation?
Reset the lamp timer in the projector menu, then check that the hour counter starts from zero and the on-screen status shows normal or economy mode within the rated 2 500 to 4 500 hour range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



