Sony
Sony CX75 LMPC161 132W Projector Lamp
A 132W UHP projector lamp module with bulb and housing, rated for 2,000 to 3,000 hours
- TypeProjector Lamp
- Wattage132W
- Lamp Life2,000 (High Brightness) - 3,000 (Normal) Hrs.
- Ready to install with pre-assembled bulb and housing
- 132W UHP bulb powers bright projection
- Lamp life up to 3000 hours in normal mode
- Manufactured to ISO 9001 quality standards
- Genuine Sony LMPC161 replacement for CX75 projectors
Ready-to-install Sony CX75 projector lamp
The Sony CX75 LMPC161 is a new 132W replacement lamp module supplied with a UHP bulb already fitted in its housing, so it fits straight into compatible Sony projectors without extra assembly. It is aimed at owners of CX75-series projectors who need a drop-in replacement when the original lamp reaches end of life.
Replaces a spent original lamp
Swapping to this module restores brightness when the existing lamp has dimmed or failed after its rated 2,000 hours in high-brightness mode or 3,000 hours in normal mode. The jump is worth it when image quality has noticeably dropped or the projector signals a lamp replacement warning.
Verify the exact projector model
Confirm that your Sony projector uses the LMPC161 part before ordering, because several CX75 lamp versions exist and only the correct module will seat and ignite properly. Check the current lamp’s label or the projector’s service menu for the matching part number.
Highlights
- Ready to install with pre-assembled bulb and housing
- 132W UHP bulb powers bright projection
- Lamp life up to 3000 hours in normal mode
- Manufactured to ISO 9001 quality standards
- Genuine Sony LMPC161 replacement for CX75 projectors
Specifications
| Brand | Sony |
|---|---|
| Type | Projector Lamp |
| Wattage | 132W |
| Lamp Life | 2,000 (High Brightness) - 3,000 (Normal) Hrs. |
Questions about this item
Does the LMPC161 lamp module include the housing for direct mounting?
Yes, the CX75 lamp is a fully assembled 132W bulb and housing ready for direct installation in your Sony projector.
What is the correct procedure to reset the lamp timer after installing the CX75 module?
After fitting the new LMPC161 lamp, access the projector menu and reset the lamp timer to zero so the 2,000–3,000 hour counter starts accurately.
How many hours of use can I expect before the 132W UHP bulb needs replacement?
The lamp is rated for 2,000 hours in High Brightness mode or 3,000 hours in Normal mode before a new module is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



