We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black handheld dynamic microphone with 16ft XLR to 1/4 inch cable

SonixForce SF01 Dynamic Microphone Black with 16ft XLR to 1/4" Cable

SKU CH-GQWJ-QAMYH

Dynamic cardioid microphone for vocals with 16 ft XLR to 1/4" cable and 6.35 mm adapter

  • ColorA-Black
  • Microphone Sensitivity-52 decibels
  • Microphone Impedance450 ohm
  • Microphone Signal to Noise Ratio(SNR)53 decibels
  • FeaturesRuns on Plug-In Power
  • Cardioid pattern rejects off-axis noise for clear vocals
  • 40 Hz – 16 kHz range captures full voice detail
  • Zinc die-cast body with steel mesh grille withstands stage use
  • 16 ft XLR-to-¼" cable with spiral copper core resists signal loss
  • Plug-in power operation needs no batteries or charging

SonixForce SF01 Dynamic Microphone

The SonixForce SF01 is a cardioid dynamic microphone designed for vocal capture in live and recording settings. It ships with a 16ft XLR to 1/4 inch cable and a 6.35mm to 3.5mm adapter for direct connection to mixers, amplifiers, PCs and speakers. The all-metal zinc die-cast body weighs 300g and includes a built-in pop filter and anti-shock grip to reduce handling noise. An on-body switch provides immediate mute control without software.

Upgrade from USB or headset mics

This microphone replaces USB microphones or headset boom mics when a balanced XLR connection and dedicated preamp gain are required. The jump is worth it for users who need consistent signal integrity over longer cable runs without digital latency or driver dependence. The 450 ohm impedance and -52dB sensitivity are optimised for standard microphone preamps found on audio interfaces and mixing consoles. No phantom power is required, simplifying the signal chain for plug-and-play operation.

Suited for singers, speakers and karaoke

The cardioid pattern and 40Hz to 16kHz frequency response target vocal clarity while rejecting off-axis sound, making it suitable for singers, podcasters and karaoke use. The rugged construction and steel mesh windscreen withstand regular stage handling. Buyers needing condenser-level detail for quiet acoustic instruments or studio voice-over work should consider a different microphone type. Users requiring wireless freedom or onboard DSP effects will not find those features here.

Highlights

  • Cardioid pattern rejects off-axis noise for clear vocals
  • 40 Hz – 16 kHz range captures full voice detail
  • Zinc die-cast body with steel mesh grille withstands stage use
  • 16 ft XLR-to-¼" cable with spiral copper core resists signal loss
  • Plug-in power operation needs no batteries or charging

Specifications

BrandSonixForce
ModelSF01
Part NumberSF01
ColorA-Black
Microphone Sensitivity-52 decibels
Microphone Impedance450 ohm
Microphone Signal to Noise Ratio(SNR)53 decibels
FeaturesRuns on Plug-In Power

Questions about this item

What connector does the 16ft cable end in for the mixer or speaker?

The cable terminates in a 1/4 inch (6.35mm) plug, and a 6.35mm to 3.5mm adapter is included for smaller inputs.

How do I power the SF01 and avoid the common mistake of leaving it silent?

It runs on plug-in power from the XLR input; slide the external on/off switch to the on position after connecting the cable.

When should I replace the included 16ft XLR to 1/4 inch cable?

Replace it if the spiral copper core or tin foil shielding is damaged, causing signal loss or interference during use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.