SonicWall
SonicWall 02-SSC-2466 52-port managed network switch 48×RJ45 4×SFP 740W PoE
Managed 52-port switch with 48 PoE RJ45 ports, four 10 Gbps SFP slots and a 740 W PoE budget
- FormatDesktop
- Network Management TypeManaged
- Primary Ports48 x RJ45 + 4 x SFP
- Primary Port Speed10/100/1000Mbps + 10 Gbps
- MAC Address Table32K
- Buffer Memory2MB
- Managed Layer 2 switch simplifies network control
- 48 Gigabit PoE ports power devices through Ethernet cables
- 740 W PoE budget supports many powered endpoints
- Four 10 Gbps SFP uplinks enable high-speed aggregation
- 1U rack-mountable chassis fits standard server cabinets
52-port managed PoE switch
The SonicWall 02-SSC-2466 is a managed network switch built for commercial deployments that need high-density Power over Ethernet. It delivers 48 Gigabit RJ45 ports and four 10 Gigabit SFP expansion slots in a single rack-mountable unit. Network administrators can configure VLANs, QoS and security policies across all 52 ports. Organisations requiring 10 Gigabit copper uplinks or fibre runs beyond the SFP specification should evaluate alternative hardware.
Thermals and power draw
The switch operates from 0 to 40°C with a fixed 900W internal supply rated for 100-240VAC at 50-60Hz. Typical system consumption is listed at 530W while the PoE budget reaches 740W for attached devices. Fan noise varies with load and ambient temperature; the 1U chassis fits standard racks without additional clearance. Installations in unconditioned spaces above 40°C are not supported.
Bundled accessories and software
The unit includes the fixed power supply and rack-mount brackets for immediate 1U installation. Management features are provided by the embedded operating system; no separate licence or external controller is required for Layer 2 functions. PoE scheduling and port-level power limits are configurable through the management interface. Advanced Layer 3 routing or cloud-managed features are not included in the base firmware.
Highlights
- Managed Layer 2 switch simplifies network control
- 48 Gigabit PoE ports power devices through Ethernet cables
- 740 W PoE budget supports many powered endpoints
- Four 10 Gbps SFP uplinks enable high-speed aggregation
- 1U rack-mountable chassis fits standard server cabinets
Specifications
| Brand | SONICWALL |
|---|---|
| Model | 02-SSC-2466 |
| Format | Desktop |
| Network Management Type | Managed |
| Primary Ports | 48 x RJ45 + 4 x SFP |
| Primary Port Speed | 10/100/1000Mbps + 10 Gbps |
| MAC Address Table | 32K |
| Buffer Memory | 2MB |
| PoE | 740W |
| Power | 900W Fixed, 100-240VAC 50-60Hz |
| Dimensions | 17.32" x 12.2" x 1.73" |
| Weight | 10.58 lbs. |
| Temperature | Operating Temperature: 0 - 40°C Storage Temperature: -40 - 70°C |
| Humidity | 10-95% R.H |
| Shipping weight | 5.90 kg |
| Package size | 508 × 381 × 127 mm |
Questions about this item
How do I install the SonicWall 02-SSC-2466 in a rack and what step is often missed?
Mount the 1U chassis using the included brackets into a standard rack, then connect the fixed 900W power supply to 100-240VAC; the step often missed is confirming front-to-rear airflow clearance so the 0-40°C operating range is maintained.
What maintenance or replacement will the SonicWall 02-SSC-2466 need later?
The fixed 900W internal power supply is not hot-swappable; if it fails the switch must be powered down and the unit replaced, and fan bearings should be checked periodically to sustain the 0-40°C operating envelope.
What limit appears first on the SonicWall 02-SSC-2466 under sustained heavy load?
The 740W PoE budget caps total powered-device draw across the 48 RJ45 ports, and the 2MB buffer memory limits burst absorption before packet drops occur during prolonged congestion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



