Solinba Inverter
Solinba Inverter 1000W Grid-Tie Pure Sine Wave DC22-56V AC90-130V USA Plug Black
Converts 22-56V DC solar input to 90-130V AC grid power at 1000W with MPPT and anti-island protection
- OutletUSA plug
- Cord Length1.5m cable
- InputDC22-56v
- Maximum Input Amps / Watts40 amps
- Output Voltage90-130v
- Output Peak Power1000W
- Connect solar panels directly with 22-56V DC input
- Deliver 1000W pure sine wave to 90-130V AC grid
- Stack multiple units to scale system capacity
- Built-in MPPT optimises panel harvest automatically
- Anti-islanding plus six safety protections included
Grid-tie inverter for solar panels
The Solinba grid-tie inverter connects solar panels directly to a home AC supply without extra equipment. It accepts DC input from mono-crystalline, poly-crystalline or thin-film modules and feeds synchronised power into the grid. The unit is designed for installers and homeowners adding distributed generation to an existing electrical system.
DC 22-56 V input and 46-65 Hz output window
Operation requires a panel array that stays within the 22 to 56 volt DC range and delivers no more than 40 amps. The AC output locks to the grid between 90 and 130 volts at 46 to 65 Hz; outside this window the inverter disconnects to satisfy anti-islanding rules. A 1.5 m cable with a USA plug provides the grid connection.
1000 W peak output
The single figure that decides suitability is the 1000 W peak rating; arrays sized above this level will clip. Buyers needing more power must combine multiple stackable units rather than use a single larger inverter. The built-in MPPT function extracts maximum power from each connected string up to the stated peak.
Highlights
- Connect solar panels directly with 22-56V DC input
- Deliver 1000W pure sine wave to 90-130V AC grid
- Stack multiple units to scale system capacity
- Built-in MPPT optimises panel harvest automatically
- Anti-islanding plus six safety protections included
Specifications
| Brand | Solinba |
|---|---|
| Outlet | USA plug |
| Cord Length | 1.5m cable |
| Input | DC22-56v |
| Maximum Input Amps / Watts | 40 amps |
| Output Voltage | 90-130v |
| Output Peak Power | 1000W |
Questions about this item
Should I pick the DC22-56V version or the lower-voltage DC11-28V unit for my solar array?
The supplier recommends the DC22-56V model because its higher input voltage draws fewer amps, keeping the inverter and components cooler for better efficiency.
What does the 1000W peak output mean when the inverter is connected to my home grid?
It is the maximum AC power the unit can push into a 90-130V household circuit at 46-65Hz, limited by the 40A DC input rating.
What grid standard does the USA plug output follow, and what voltage range does it actually support?
The inverter synchronises to the local 46-65Hz grid and feeds power into any AC voltage between 90V and 130V through the standard USA plug.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115342BTC
In stock
