We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Soler & Palau PV-200X inline centrifugal duct fan, galvanised steel housing, 8 inch duct connection

Soler and Palau

Soler and Palau PV-200X Inline Centrifugal Duct Fan 8 In

SKU CH-V2PC-P3ANN

Inline centrifugal duct fan moves 544 cfm at 0.000 in SP through 8 in duct with 180 W motor at 2,930 RPM

  • Delivers 544 cfm airflow at zero static pressure
  • 180 W motor runs at 2,930 RPM for strong output
  • IP44 rating protects against splashing water
  • Galvanized steel housing resists corrosion in duct runs
  • Handles inlet air up to 140 °F for dryer booster use

Soler & Palau 8-Inch Inline Centrifugal Fan

This new Soler & Palau inline centrifugal duct fan suits residential and light-commercial ventilation where an 8-inch duct is specified. It delivers 544 cfm of airflow at .000 in static pressure for dryer-boosting or general-purpose exhaust. The single-speed motor runs on 120V AC single-phase power and includes a mounting bracket for straightforward installation.

Thermals Noise and Power Draw

The 180 W motor operates at 930 RPM and carries an IP44 rating for protection against splashing water. Maximum inlet air temperature is 140 Degrees F, allowing use in warm exhaust streams. No speed control is included, so the unit runs at fixed output whenever powered. Galvanized-steel housing resists corrosion in typical indoor environments.

Mounting Bracket and Installation Impact

The supplied mounting bracket lets the fan be secured directly to joists or wall studs without extra hardware. Because the housing measures 13 1/8 in wide and 8 1/2 in high, the bracket positions the unit within standard framing cavities. No high-efficiency motor designation means power draw stays at the rated 180 W during continuous operation.

Highlights

  • Delivers 544 cfm airflow at zero static pressure
  • 180 W motor runs at 2,930 RPM for strong output
  • IP44 rating protects against splashing water
  • Galvanized steel housing resists corrosion in duct runs
  • Handles inlet air up to 140 °F for dryer booster use

Specifications

BrandSOLER & PALAU

Questions about this item

How do I install the PV-200X inline fan and what step is often missed?

Mount the unit using the included bracket, connect 8 in ducting to the 8 3/4 in housing, and wire to a 120V AC supply; the step often missed is sealing every joint so static pressure stays near .000 in SP for the rated 544 cfm.

What maintenance or replacement will the PV-200X need later?

The IP44-rated motor running at 930 RPM with 180 W output requires periodic cleaning of the galvanized steel housing and impeller to prevent dust build-up that reduces airflow; bearings are sealed, so no lubrication is needed.

What limit appears first during sustained use of the PV-200X?

The maximum inlet air temperature of 140 °F is the first constraint; exceeding it trips the motor protection, so ensure the ducted air stays below that threshold during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.