We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two spools of copper desoldering braid 2.5mm wide 9.8ft long

Soldering Kit 2.5mm 9.8ft 2pcs

SKU CH-8H4X-XY7RJ

No-clean copper desoldering wick braid, 2.5 mm wide by 9.8 ft long, two pieces for PCB rework

  • Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
  • Standards/CertificationsLead Free Compliant
  • Fine braid copper wick pulls solder fast
  • No-clean flux leaves minimal non-conductive residue
  • Safe on delicate PCBs without board damage
  • Two 9.8 ft rolls of 2.5 mm width
  • Lead-free compliant for regulated environments

Soldering Kit 2.5mm 9.8ft

This soldering kit supplies two lengths of copper desoldering braid for removing excess solder from circuit boards. The fine braid construction promotes strong capillary action for efficient solder absorption. It suits electronics repair, prototyping and rework tasks in labs, workshops or home setups. The no-clean flux leaves minimal non-conductive residue after use.

No-Clean Flux Braided Wick

Each braid measures 2.5mm wide and 9.8ft long, providing ample material for multiple desoldering jobs. The flat-stitch copper weave conducts heat quickly to speed up solder removal. Flux is integrated into the braid so no separate flux application is required. Residue remains non-corrosive and non-conductive, eliminating post-work cleaning steps.

Lead-Free Compliant Copper Braid

The wicks are made from 100% copper wire and meet lead-free compliance standards for modern electronics work. They are designed for out-opening, narrow-stile store front door hardware compatibility. The supple braid conforms to tight joints and small component pads without damaging the board. Two pieces are included to extend usable length across larger projects.

Highlights

  • Fine braid copper wick pulls solder fast
  • No-clean flux leaves minimal non-conductive residue
  • Safe on delicate PCBs without board damage
  • Two 9.8 ft rolls of 2.5 mm width
  • Lead-free compliant for regulated environments

Specifications

Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
Standards/CertificationsLead Free Compliant

Questions about this item

Will I need to replace the 2.5 mm wide braid once the 9.8 ft length is used up?

Yes, the 9.8 ft roll is consumable; when it runs out you simply buy another 2.5 mm no-clean wick.

What stops the wick from absorbing more solder during a long desoldering session?

The 100 % copper braid saturates once its capillary channels are full, so you trim the used section and continue with fresh wick.

Does the no-clean flux leave any conductive or corrosive residue after hours of use?

The flux is formulated to leave only non-conductive, non-corrosive residue, so no cleaning is required even after extended work.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.