Soldering Iron Tips 10pcs Copper Retaining Sleeve 936 937 938 969 8586 852D
Set of ten oxygen-free copper tips in I, B, K, 1.2D, 1.6D, 2.4D, 3.2D, 2C, 3C and 4C shapes with a retaining sleeve, compatible with 936, 937, 938, 969, 8586 and 852D stations
- Standards/CertificationsLead Free Compliant
- Oxygen-free copper tips tin easily for low-temperature precision work
- Ten assorted I, B, K, 1.2D, 1.6D, 2.4D, 3.2D, 2C, 3C, 4C shapes cover diverse joint sizes
- Included retaining sleeve enables quick tool-free swaps on compatible stations
- Compact 42 mm length and light weight fit neatly in any toolbox
- Fits 936, 937, 938, 969, 8586, 852D stations for broad workshop compatibility
10-piece copper tip set
This 10-piece soldering tip set includes oxygen-free copper tips with electroplated iron and nickel surfaces. It fits 936, 937, 938, 969, 8586 and 852D soldering stations. A retaining sleeve is supplied for quick tip changes.
Easy sleeve installation
Tips slide into the retaining sleeve and lock onto compatible stations without tools. The 42 mm length and 6 mm outer diameter match the listed station barrels. Wrong barrel diameters or missing sleeves cause loose fit and poor heat transfer.
For multi-station workshops
Technicians who service several station models benefit from one kit covering all listed types. Users needing only a single tip shape or stations outside the 936, 937, 938, 969, 8586, 852D range should buy dedicated tips.
Highlights
- Oxygen-free copper tips tin easily for low-temperature precision work
- Ten assorted I, B, K, 1.2D, 1.6D, 2.4D, 3.2D, 2C, 3C, 4C shapes cover diverse joint sizes
- Included retaining sleeve enables quick tool-free swaps on compatible stations
- Compact 42 mm length and light weight fit neatly in any toolbox
- Fits 936, 937, 938, 969, 8586, 852D stations for broad workshop compatibility
Specifications
| Standards/Certifications | Lead Free Compliant |
|---|
Questions about this item
How can I confirm the tips are heating properly after fitting them to my 936 station?
Set the station between 200 and 480 degrees, apply solder to the plated surface, and it should melt and coat the tip evenly within a few seconds.
What comes in the package and is anything else needed to start using them?
The box contains ten tips — one each of I, B, K, 1.2D, 1.6D, 2.4D, 3.2D, 2C, 3C and 4C — plus a retaining sleeve; no extra parts are required for installation.
Which tip shape should I pick for fine SMD work versus larger through-hole joints?
Choose the I or 1.2D tip for fine SMD pads, and the 3.2D, 3C or 4C tip for larger through-hole connections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
