We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A spool of fine copper braid 2.5mm wide 3m long on a cardboard card

Soldering 2.5mm x 3m

SKU CH-VJYY-QZRG3

No-clean braided copper wick, 2.5 mm wide by 3 m long, removes solder with minimal halide-free residue

  • Standards/CertificationsLead Free Compliant
  • Removes solder fast with 100 % copper fine braid
  • Leaves only halide-free non-conductive residue after use
  • Safe on PCB boards during industry lab or home work
  • 5 mm width by 3 m length suits many joints
  • Lead-free compliant for modern electronics assembly

Solder Wick for Desoldering Tasks

This no-clean solder braided wick removes excess solder during rework and repair. It suits technicians, hobbyists and students working on circuit boards in industrial, laboratory or home environments. The fine braid design pulls solder away quickly without damaging the PCB.

2.5 mm Width by 3 Metre Length

The wick measures 2.5 mm wide and 3 metres long, giving ample length for multiple desoldering jobs. This specific size determines whether the braid fits the joints and pads you are servicing. It is supplied as a single pack with a random label colour.

100% Copper Braid with Halide-Free Residue

The pure copper construction provides fast heat conduction and strong capillary action for efficient solder uptake. Residues left behind are non-corrosive, non-conductive and halide free, reducing post-cleaning time. It handles through-hole and surface-mount joints, but very large ground planes or high-mass connectors may exceed its thermal capacity.

Highlights

  • Removes solder fast with 100 % copper fine braid
  • Leaves only halide-free non-conductive residue after use
  • Safe on PCB boards during industry lab or home work
  • 5 mm width by 3 m length suits many joints
  • Lead-free compliant for modern electronics assembly

Specifications

Standards/CertificationsLead Free Compliant

Questions about this item

How much desoldering length does the 3 m roll actually give you?

The roll provides 3 metres of 2.5 mm wide copper braid, enough for many joint clean-ups before you need a fresh spool.

What does the no-clean, halide-free flux mean for the board after use?

It leaves only a tiny, non-corrosive, non-conductive residue so you can skip a separate cleaning step and avoid board damage.

Will the 2.5 mm width fit between tight through-hole pins?

At 2.5 mm wide the braid slides between standard pin spacings and the fine flat weave conforms to small joints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.