We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue digital LCD soldering iron with stand and three tips on a grey surface

SolderAce 80W Digital LCD Soldering Kit 356°F-896°F 3 Tips

SKU CH-9V0V-8PTMS

80 W digital LCD soldering kit with 356–896 °F range, ceramic heater, three tips, solder wire, flux paste and stand for laptop and mobile repair

  • Watts80 watts
  • Compatibility/FitmentFT01pro, SolderAce, SA-D525
  • Commercial/ResidentialLaptop & Mobile Repair
  • Precise 356 °F–896 °F range protects delicate PCBs
  • 80 W ceramic core heats in seconds for fast starts
  • Complete kit: iron, 3 tips, flux, solder wire, stand
  • Three electroplated tips cover SMD, chisel and general tasks
  • Dual-voltage 110 V/220 V works worldwide without adapter

SolderAce 80W Digital LCD Kit

This 80 watt soldering station targets technicians repairing laptops, mobile devices and other compact electronics. A digital LCD shows the exact tip temperature between 356°F and 896°F so you can match heat to fragile PCB components. The kit ships with three electroplated tips, 50g solder wire, no-clean flux paste and a wide-base stand with brass wool cleaner. Everything needed for bench work is in the box.

Fast Ceramic Core Thermal Behaviour

The ceramic heating element reaches working temperature in seconds and holds it steady through long repair sessions. Stable output prevents the temperature drift that can damage sensitive SMD parts or leave cold joints on heavier connections. Power draw is 80 watts at either 110V or 220V mains, so the iron runs on standard bench power without extra wiring. No fan or active cooling is mentioned in the specifications.

Bundled Accessories Practical Impact

Three tips cover fine conical work, broader chisel joints and general purpose soldering without buying extras. The included no-clean flux paste reduces post-solder cleaning time on dense boards. Fifty grams of solder wire handles multiple repairs before a refill is needed. The stand’s brass wool and sponge keep tips clean and the workspace organised during intensive use.

Highlights

  • Precise 356 °F–896 °F range protects delicate PCBs
  • 80 W ceramic core heats in seconds for fast starts
  • Complete kit: iron, 3 tips, flux, solder wire, stand
  • Three electroplated tips cover SMD, chisel and general tasks
  • Dual-voltage 110 V/220 V works worldwide without adapter

Specifications

Watts80 watts
Compatibility/FitmentFT01pro, SolderAce, SA-D525
Commercial/ResidentialLaptop & Mobile Repair

Questions about this item

How do I install the three electroplated tips on the SolderAce 80W iron, and what step do people often skip?

Loosen the retaining nut, slide the chosen tip onto the ceramic heating core, then tighten the nut firmly; the step often skipped is seating the tip fully before tightening, which causes poor heat transfer.

What maintenance will the SolderAce 80W kit need later, and which included item handles it?

Tips oxidise over time; clean them regularly with the brass wool cleaner on the supplied stand and re-tin with the 50g solder wire to maintain thermal performance.

What limit appears first during a long SolderAce 80W session at 896°F?

The ceramic core holds the set temperature steadily, so the practical limit is tip wear rather than thermal droop; plan to rotate or replace tips during heavy use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.