Sola
Sola 78 in Aluminum Screeding Level
Aluminum screeding level with one level vial and one plumb vial, 78 in long and accurate to ±0.5 mm/m
- TypeMeasuring & Layout Tools
- Weight0.5
- Aluminium frame resists bending on long spans
- 78 in length covers wide screeds in one pass
- Single level and plumb vials give quick reference
- Two hand grips allow steady two-handed control
- Standard accuracy of +/- 0.5 mm/m ensures reliable reads
Aluminium Screeding Level
The KESON LKS78 is a 78 in aluminium screeding level designed for levelling and smoothing wet concrete or screed across large floor areas. Its rigid frame and dual hand grips give contractors and DIY users a straight reference edge for strike-off work.
Thermal noise and power
As a non-powered hand tool it produces no heat, draws no electricity and operates silently on site. The aluminium frame dissipates ambient temperature quickly so the tool remains comfortable to hold in hot or cold conditions.
Accessory impact
Permanent end caps protect the frame ends from impact damage during transport and repeated placement on rough substrates. Two integrated hand grips improve control and reduce fatigue when dragging the level across wide pours. The single block acrylic vial provides level and plumb reference without illumination or magnification.
Highlights
- Aluminium frame resists bending on long spans
- 78 in length covers wide screeds in one pass
- Single level and plumb vials give quick reference
- Two hand grips allow steady two-handed control
- Standard accuracy of +/- 0.5 mm/m ensures reliable reads
Specifications
| Brand | KESON |
|---|---|
| Type | Measuring & Layout Tools |
| Weight | 0.5 |
Questions about this item
How do I install the 78 in aluminum screeding level on a fresh concrete slab, and what step do people get wrong?
Rest the aluminum base on the wet surface and watch the single top-read level vial; the common mistake is pushing down too hard, which bows the 78 in frame and throws off the ±0.5 mm/m accuracy
What maintenance or replacement will this screeding level need later?
The acrylic block vials are sealed behind permanent end caps and cannot be swapped; if a vial clouds or cracks the whole 78 in level must be replaced
What limit shows up first under sustained daily use on large pours?
The .5 kg aluminum extrusion can develop a permanent bow after repeated heavy screeding, and once bent the ±0.5 mm/m tolerance cannot be restored
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
