We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory decorator duplex receptacle with modular snap-in connector, flush-mount design

Snapconnect

Snapconnect SNAP2182IA 20 A 125 V AC duplex receptacle ivory

SKU CH-KV70-XJDE2

A hospital-grade 20 A 125 V AC duplex receptacle with SNAPConnect modular wiring for fast installation and device change-out

  • TypeWiring Devices
  • ColorIvory
  • Hospital-grade durability for demanding healthcare environments
  • SNAPConnect modular design enables fast rough-in then snap-on install
  • 20 A 125 V AC rating powers high-draw equipment reliably
  • Nylon face with brass contacts resists wear and corrosion
  • Certified to CSA C22.2 with 2,000 V dielectric strength

Snapconnect SNAP2182IA 20 A Receptacle

This hospital-grade duplex receptacle is rated for 20 A at 125 V AC and uses a modular SNAPConnect system that lets the connector be installed during rough-in and snapped into place after the wall is finished. The flush-mount decorator profile includes a grounding clip and mounting hardware for a secure fit.

Suited for modular wiring projects in demanding

It suits installers who need a connectorized device that simplifies device change-out in heavy-use areas. Buyers looking for a standard screw-terminal receptacle or a non-hospital-grade outlet should consider other options.

20 A 125 V AC hospital-grade rating

The single specification that decides fit is the 20 A, 125 V AC hospital-grade rating with NEMA 5-20R configuration, which determines whether the receptacle meets the required safety and durability standards for the intended circuit.

Highlights

  • Hospital-grade durability for demanding healthcare environments
  • SNAPConnect modular design enables fast rough-in then snap-on install
  • 20 A 125 V AC rating powers high-draw equipment reliably
  • Nylon face with brass contacts resists wear and corrosion
  • Certified to CSA C22.2 with 2,000 V dielectric strength

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeWiring Devices
ColorIvory

Questions about this item

How do I install the SNAPConnect SNAP2182IA receptacle, and what step is often missed?

Wire the modular connector during rough-in using 12 AWG conductors, then snap the receptacle onto the connector after the wall is finished; the grounding clip must be secured to the box or the self-grounding staple will not provide a ground path.

What maintenance or replacement will the SNAP2182IA need over time?

The receptacle itself is maintenance-free; if a circuit fault damages the brass contacts or the nylon face cracks from impact, the modular design lets you unplug and replace only the receptacle without re-wiring the connector.

What limit appears first when the SNAP2182IA runs at full load continuously?

The 75 °C maximum continuous operating temperature is the first limit; sustained 20 A loads in a poorly ventilated box can push the device toward that thermal ceiling before the 2,000 V dielectric rating or the 94V-2 flammability threshold become factors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.