Snapconnect
Snapconnect SNAP2101ILBK 15 A illuminated rocker contactor
A 15 A illuminated rocker wall switch rated for 120/277 V AC with modular wiring and impact‑resistant thermoplastic housing
- Illuminated rocker shows status in low light
- 15 A rating handles standard lighting and motor loads
- Modular Snapconnect wiring cuts installation time
- Impact-resistant thermoplastic housing withstands industrial use
- UL Listed for 120/277 V AC circuits
Product identity and intended users
The Snapconnect SNAP2101ILBK is a 15 A illuminated rocker contactor designed for industrial lighting control. It provides a single-pole maintained switch function with a modular wiring method that speeds installation. The black thermoplastic housing carries a 120/277V AC voltage rating and a 2 hp horsepower rating. UL Listed status confirms compliance for commercial and industrial environments.
Capacity and headroom
Rated at 15 A, the device comfortably handles standard branch-circuit lighting loads up to its 2 hp motor rating. The 120/277V AC dual voltage range covers common North American panel voltages. Operation is specified to a maximum of 167 Degrees F, so ambient temperatures above that limit fall outside the rated envelope. The single-pole mechanism does not support multi-way switching configurations.
Thermals noise and power draw
The impact-resistant thermoplastic housing dissipates heat without active cooling, so the unit runs silently. No fan or moving parts generate audible noise during normal switching. Power draw is limited to the coil and indicator illumination inherent to the 15 A rating. Grounded construction and back-wiring modular connection maintain stable thermal performance within the 167 Degrees F maximum operating temperature.
Highlights
- Illuminated rocker shows status in low light
- 15 A rating handles standard lighting and motor loads
- Modular Snapconnect wiring cuts installation time
- Impact-resistant thermoplastic housing withstands industrial use
- UL Listed for 120/277 V AC circuits
Specifications
| Brand | SNAPCONNECT |
|---|
Questions about this item
Will the 15 A illuminated rocker fit into my existing modular wiring system?
The switch uses a modular wiring connection type and a back wiring method, so it connects directly to compatible Snapconnect devices without pigtailing.
How can I verify the switch is operating correctly once installed?
The built-in illumination lights when the circuit is energised, giving immediate visual confirmation that the 120/277 V AC supply is reaching the load.
Does the package include a wall plate or must I order one separately?
The switch is supplied as a single unit; a matching wall plate is not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
