Snapconnect
Snapconnect SNAP1201ILI contactor 1-Pole 15A 120/277V AC
Illuminated single-pole wall switch rated 15 A at 120/277 V AC with snap-in wiring and UL listing
- 15 A switching capacity for lighting and motor loads
- 120/277 V AC rating fits standard commercial circuits
- Single-pole toggle action for simple on/off control
- Snap-in module wiring speeds up installation
- UL Listed and impact-resistant for code-compliant safety
Single-pole 15 A wall switch
The Snapconnect SNAP1201ILI is a single-pole toggle switch rated at 15 A and 120/277 V AC. It is built for residential or light-commercial lighting circuits where a maintained on/off action is required. The ivory-coloured body carries a UL listing and an impact-resistant housing. No pilot light or night-light function is included.
Snap-in wiring and standard mounting
The device uses a snap-in module connection method and back-wiring access, which speeds up installation in standard wall boxes. Mounting holes are spaced on a 3.3 in centre-to-centre height, matching common box patterns. One switch occupies a single gang opening and does not require a dedicated neutral for operation.
Passive operation with no standby draw
As a mechanical toggle, the switch draws no power in either position and adds no active thermal load to the enclosure. Operation is silent aside from the mechanical click, and there are no illuminated components to generate heat. The unit simply interrupts or completes the circuit up to its 15 A rating.
Highlights
- 15 A switching capacity for lighting and motor loads
- 120/277 V AC rating fits standard commercial circuits
- Single-pole toggle action for simple on/off control
- Snap-in module wiring speeds up installation
- UL Listed and impact-resistant for code-compliant safety
Specifications
| Brand | HUBBELL |
|---|
Questions about this item
At what current does the 15 A rating become the limiting factor under continuous load?
The contactor is rated for 15 A at 120/277 V AC, so sustained currents above 15 A will exceed its rating.
How much heat or noise does the switch produce when left on all day?
As a mechanical toggle with snap-in wiring and no pilot light, it generates negligible heat and no audible noise during continuous operation.
Which back-box depth or mounting hardware must I already have for the 3.3 in hole spacing?
The unit mounts on 3.3 in centre-to-centre holes, so a standard US wall box with that spacing is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
