SMY Lighting
SMY Lighting Recessed LED Deck Light Kit 6 Pack Upgrade Version Silver
Six warm-white 1.5 W IP67 deck lights with a 12 V transformer install in 42 mm holes for steps, patios or kitchen plinths
- finishSilver
- materialMetal
- Bright starry ambiance from warm 2800-3200K LEDs
- Low 12V DC power with 1.5W per light cuts energy use
- IP67 waterproof 304 stainless steel body withstands outdoor conditions
- Simple drill-and-push install fits 42mm cut-out in deck or step
- 50000-hour lifespan and 800 lumen output give lasting illumination
Kit Contents & Purpose
The SMY Lighting Recessed LED Deck Light Kit includes six silver-finished metal fixtures and a DC12V power supply. It is designed for homeowners wanting low-voltage accent lighting for indoor or outdoor stairs, patios, decks, and kitchen plinths.
Deciding Specification
Each fixture draws 1.5W and produces 800 lumens at a warm white colour temperature of 2800K to 3200K. The IP67-rated, glue-filled bodies with 304 stainless steel construction ensure full waterproof insulation for safe in-ground or wet-location installation.
Build Integration
The kit operates on a 12V transformer accepting AC90-265V input, with a maximum load of 15W supporting up to ten lights in series. Installation requires drilling a 42mm cut-out hole for each 55mm diameter light, spaced up to one metre apart along the 3M cable run.
Highlights
- Bright starry ambiance from warm 2800-3200K LEDs
- Low 12V DC power with 1.5W per light cuts energy use
- IP67 waterproof 304 stainless steel body withstands outdoor conditions
- Simple drill-and-push install fits 42mm cut-out in deck or step
- 50000-hour lifespan and 800 lumen output give lasting illumination
Specifications
| finish | Silver |
|---|---|
| material | Metal |
Questions about this item
How bright will the 800 lm output look once the lights are recessed in a deck?
The 800 lm total from the six 1.5 W fixtures produces a warm white 2800–3200 K glow with a 120° beam, giving a soft starry effect on steps and patios rather than a focused spotlight.
What does the DC 12 V low-voltage interface limit in a real installation?
The included 15 W transformer caps the run at ten fixtures in series, with a maximum 1 m spacing between lights, so longer runs need an additional power supply.
What hole size and depth are needed to mount each 55 mm diameter fixture?
Drill a 42 mm cut-out and allow 20 mm clearance behind the surface; the stainless-steel body pushes in and sits flush with the 3M cable exiting the back.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



