SMUGDESK
SMUGDESK USB-C to USB-A 3.2 Gen 2 Cable 1.5ft 10Gbps 60W
A 1.5 ft USB-C to USB-A cable delivering 10 Gbps data transfer and 60 W fast charging for portable SSDs, laptops and phones
- 10Gbps bandwidth cuts large-file transfer time for portable SSDs
- 60W 3A power delivery fast-charges phones tablets and USB-C laptops
- 5ft compact length keeps desks tidy and suits docking stations
- Reinforced strain-relief connectors resist bending damage from daily use
- Wide compatibility covers phones laptops portable SSDs cameras and Type-C peripherals
What this cable does
This 1.5-foot USB-C to USB-A 3.2 Gen 2 cable delivers up to 10Gbps data transfer and up to 60W 3A power delivery. It connects portable SSDs, cameras, phones and laptops to standard USB-A ports for fast file backup and charging.
Who it suits and who it does not
The short length keeps desks tidy and works well with docking stations or drives that sit next to the computer. Builders who need a longer reach for wall chargers, monitor hubs or across-desk routing should look at something else.
The spec that decides fit
The USB 3.2 Gen 2 rating sets the 10Gbps ceiling; if your device and port both support that speed you will see the full benefit, otherwise transfer will run at the lower rate the port allows.
Highlights
- 10Gbps bandwidth cuts large-file transfer time for portable SSDs
- 60W 3A power delivery fast-charges phones tablets and USB-C laptops
- 5ft compact length keeps desks tidy and suits docking stations
- Reinforced strain-relief connectors resist bending damage from daily use
- Wide compatibility covers phones laptops portable SSDs cameras and Type-C peripherals
Specifications
No published specifications for this item yet.
Questions about this item
What USB-A port type does the 1.5ft cable plug into for 10Gbps speed?
It requires a USB 3.2 Gen 2 Type-A port to reach the rated 10Gbps data rate.
Which end must be inserted first when connecting a portable SSD to a laptop?
Plug the USB-A connector into the host computer before attaching the USB-C end to the SSD to ensure proper bus enumeration.
How often should the reinforced strain-relief junctions be inspected for wear?
Check the connector junctions every few months; replace the cable if the moulding shows cracks or the cable feels loose at either end.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



