SMUGDESK
SMUGDESK USB-C cable 100W 2-pack 6.6ft blue
Two 6.6 ft USB-C to USB-C cables deliver up to 100 W PD 3.0 and QC 4.0 charging with built-in E-marker chips, 480 Mbps data transfer, and nylon-braided durability rated for over 10,000 bends
Model 2 pieces
- 1 pack
- 2 pieces
- Charges a MacBook Pro to 55% in 35 minutes with 100W PD 3.0 and QC 4.0 support
- E-marker chips boost charging efficiency by 80% and stability by 90% while reducing heat
- Nylon braid and 250d fiber core survive over 10000 ninety-degree bends without fraying
- Transfers data at up to 480Mbps for 1GB files in under a minute
- Two 6.6ft blue cables give flexible reach for phones, tablets and laptops
Two-Pack USB-C Charging Cables
This two-pack supplies two 6.6 ft USB-C to USB-C cables rated for 100W Power Delivery. They suit anyone who needs spare or replacement cords for laptops, tablets and phones that charge over USB-C.
Heat, Noise and Power Draw
Built-in E-marker chips match the required current, cutting heat output versus 60W cables. Charging efficiency rises by 80% and stability by 90%, so the cables run cooler during high-wattage sessions.
480 Mbps Data Limit
Data transfer tops out at 480 Mbps and the cables do not carry a video signal. Buyers who need faster sync speeds or external-display support should choose a different cable.
Highlights
- Charges a MacBook Pro to 55% in 35 minutes with 100W PD 3.0 and QC 4.0 support
- E-marker chips boost charging efficiency by 80% and stability by 90% while reducing heat
- Nylon braid and 250d fiber core survive over 10000 ninety-degree bends without fraying
- Transfers data at up to 480Mbps for 1GB files in under a minute
- Two 6.6ft blue cables give flexible reach for phones, tablets and laptops
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
SMUGDESK USB C to USB C Cable 2-Pack 6.6ft 100W PD 5A 480Mbps Nylon Braided
Questions about this item
How do I connect the cable so the E-marker chip negotiates 100W PD charging?
Plug the USB-C connectors fully into both the power source and the device; the built-in E-marker chip then negotiates up to 20V 5A automatically, but the charger must also support PD 3.0 at 100W.
When should I replace the cable if the nylon braid or aluminum housing shows wear?
The cable is rated for over 10,000 ninety-degree bends; replace it once the braid frays, the housing cracks, or charging speed drops below the usual 100W PD rate.
What limits sustained 100W charging before the cable throttles?
Heat buildup is the first limit; the E-marker chip reduces current if temperature rises, so sustained 100W output depends on the charger and device thermal management.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector








