We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided USB-A to USB-C cables, ten feet each

SMUGDESK

SMUGDESK USB A to USB C Cable 10ft 2-pack Braided 10Gbps 60W

SKU CH-K5XZ-RFAQJ

Two 10 ft braided USB-A to USB-C cables deliver 10 Gbps data and 60 W charging

Model 2 pieces

  • Fast 60W charging with 3A current and 56K ohm resistor
  • 10Gbps data transfer moves large files in seconds
  • Two 10ft braided cables give extra reach and durability
  • Metal connectors resist wear from repeated plugging
  • Works with QC 3.0 devices for 25% faster charging than 2.4A cables

Two 10 ft cables for USB-A to USB-C connections

This pack supplies two braided cables, each 10 ft long, that link a USB-A host to USB-C devices such as phones, tablets, laptops and external SSDs. The 3.2 Gen 2 interface delivers up to 10 Gbps data throughput for rapid file syncs. A 56 kΩ pull-up resistor and 3 A current rating enable 60 W Quick Charge 3.0 power delivery where both charger and device support it. The cables do not carry video signals.

Braided jacket and metal shells handle daily flexing

A nylon braid protects the conductors from abrasion while the metal connector housings resist insertion wear. The 3 A limit means the cables cannot satisfy proprietary 4.5 V / 5 A or 5 V / 4 A super-charge schemes used by certain brands. Standard 5 V / 3 A charging proceeds safely within the resistor specification. No active cooling or power negotiation beyond QC 3.0 is involved.

10 Gbps data rate decides suitability for large

The single decisive figure is the 10 Gbps (1250 MB/s) peak transfer speed offered by the USB 3.2 Gen 2 link. Buyers moving multi-gigabyte photo libraries or video projects will benefit; those needing only charging or slower sync can use lesser cables. The lack of display output and the 3 A current ceiling exclude docks, monitors or high-wattage laptop charging from the supported use cases.

Highlights

  • Fast 60W charging with 3A current and 56K ohm resistor
  • 10Gbps data transfer moves large files in seconds
  • Two 10ft braided cables give extra reach and durability
  • Metal connectors resist wear from repeated plugging
  • Works with QC 3.0 devices for 25% faster charging than 2.4A cables

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect this 10 ft USB A to USB C cable to my computer and external SSD, and what step is often missed?

Plug the USB-A end into the computer and the USB-C end into the SSD; the step often missed is ensuring both ports support USB 3.2 Gen 2 to achieve the 10 Gbps data rate.

What maintenance or replacement will this braided nylon cable need over time?

Inspect the braided jacket and metal connectors periodically for fraying or bent pins; replace the cable if the 56 kΩ resistor fails or if charging drops below 3 A at 60 W.

What limit appears first during sustained large-file transfers with this 10 Gbps cable?

The 10 Gbps (1250 MB/s) interface ceiling is reached before the cable itself; actual throughput will also depend on the host controller and SSD write speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.