SMUGDESK
SMUGDESK USB A to C cable 3.2 Gen 2 10Gbps 3A braided 3.3ft 2-pack black
Two 3.3 ft braided USB-A to USB-C 3.2 Gen 2 cables deliver 10 Gbps data transfer and 3 A QC 3.0 charging
- Transfers large files in seconds with 10Gbps USB 3.2 Gen 2 speed
- Charges compatible devices 25% faster via 3A QC 3.0 and 56K ohm resistor
- Braided nylon jacket and metal connectors withstand daily bending and plugging
- Two 3.3ft cables give spare length for desk, bag or travel use
- Works with USB-C phones, SSDs and controllers — no video or proprietary fast-charge support
Two-pack USB A to C cable
This two-pack supplies two USB-A to USB-C cables built to the USB 3.2 Gen 2 specification. Each cable handles data at up to 10 Gbps (1250 MB/s) and carries 5 V / 3 A power for QC 3.0 fast charging. The 3.3 ft length suits desk or bag use with phones, portable SSDs or a PS5 controller.
Braided nylon jacket and metal plugs
A braided nylon sheath resists kinks and abrasion while the metal connector shells withstand repeated insertion cycles. An internal 56 kΩ pull-up resistor ensures correct host-to-device negotiation so the link trains at the rated speed without signal degradation. No active cooling or fan is involved, so the cables add no audible noise or thermal load to the system.
QC 3.0 charging with noted limits
The cables deliver 60 W (5 V / 3 A) when both the charger and the device support QC 3.0, which is 25 % quicker than 2.4 A alternatives. Proprietary schemes such as 4.5 V / 5 A or 5 V / 4 A are not supported, so certain handsets will not reach their maximum branded charge rate. The cables do not carry video signals and cannot connect to Micro-USB or Lightning ports.
Highlights
- Transfers large files in seconds with 10Gbps USB 3.2 Gen 2 speed
- Charges compatible devices 25% faster via 3A QC 3.0 and 56K ohm resistor
- Braided nylon jacket and metal connectors withstand daily bending and plugging
- Two 3.3ft cables give spare length for desk, bag or travel use
- Works with USB-C phones, SSDs and controllers — no video or proprietary fast-charge support
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How do I plug the USB-A to USB-C cable in so the 56K pull-up resistor protects my device?
Insert the USB-A end into the host port first, then connect the USB-C end to your device; the built-in 56K ohm resistor negotiates safe 5V/3A power before charging begins.
Will the braided nylon jacket or metal connectors need replacement after repeated bending?
The durable braided nylon jacket and sturdy metal connectors are designed for long-term use; no scheduled replacement is required unless physical damage occurs.
At what point does the 3A current limit throttle charging during extended fast-charge sessions?
The cable caps output at 5V/3A (60W), so any device requesting more than 3A — such as 4.5V/5A or 5V/4A proprietary protocols — will fall back to standard charging speeds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector








