We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular adapter with USB 3.0 cable and 12V power supply for 2.5 and 3.5 inch SATA IDE drives

SMUGDESK

SMUGDESK USB 3.0 to SATA IDE Hard Drive Adapter with 12V 2A Power Supply

SKU CH-NSPJ-54EGQ

Connects 2.5-inch and 3.5-inch IDE or SATA drives via USB 3.0 with a 12V 2A power supply for data backup and recovery

  • Connects legacy IDE and SATA drives via one adapter
  • USB 3.0 protocol speeds up large file transfers
  • 12 V 2 A power supply runs 3.5 inch desktop drives
  • Works with 2.5 inch laptop SSD and 3.5 inch mechanical disks
  • Plug-and-play design reads old drives without driver install

Universal IDE and SATA adapter

This USB 3.0 adapter connects both IDE and SATA hard drives to a modern computer. It accepts 2.5-inch laptop drives and 3.5-inch desktop drives without needing an enclosure. The all-in-one design targets technicians and home users who need quick access to legacy storage.

Replaces internal drive bays and docks

The adapter removes the requirement to install old drives inside a chassis or use a bulky docking station. It is worth choosing when you only need occasional data retrieval, cloning or backup from retired disks. For continuous multi-drive workflows a dedicated multi-bay dock remains more practical.

Handles 2.5 and 3.5 inch drives with external power

The included 12V 2A supply delivers stable current for power-hungry 3.5-inch mechanical disks, preventing spin-up failures. USB 3.0 bandwidth accelerates large file transfers compared with older USB versions. Very high-capacity arrays or RAID sets exceed the single-drive connection limit.

Highlights

  • Connects legacy IDE and SATA drives via one adapter
  • USB 3.0 protocol speeds up large file transfers
  • 12 V 2 A power supply runs 3.5 inch desktop drives
  • Works with 2.5 inch laptop SSD and 3.5 inch mechanical disks
  • Plug-and-play design reads old drives without driver install

Specifications

No published specifications for this item yet.

Questions about this item

What physical connections does the adapter need for 3.5-inch desktop drives?

The adapter connects a 3.5-inch IDE or SATA desktop drive through its data interface and requires the included 12V 2A power supply to deliver stable power for reliable operation.

Which step is often missed when installing a 3.5-inch drive with this adapter?

Users sometimes plug the USB cable into the computer before connecting the 12V 2A power adapter to the drive, causing the 3.5-inch disk to spin up incorrectly or not be recognised.

What part will need replacement if the 3.5-inch drive stops spinning up reliably?

The external 12V 2A power adapter is the component most likely to require replacement if a 3.5-inch drive suffers intermittent power or fails to spin up consistently.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.