We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green PCB adapter with gold connectors and USB 3.0 cable attached

SMUGDESK

SMUGDESK USB 3.0 12+6Pin to SATA 22Pin MacBook Air SSD Converter

SKU CH-4NSA-GRVAG

Converts 2010-2011 MacBook Air 12+6Pin SSDs to standard 22Pin SATA with USB 3.0 cable for data recovery

  • Convert 2010/2011 MacBook Air 12+6Pin SSD to standard SATA 22Pin
  • USB3.0 cable included for direct external access to legacy Apple SSD data
  • ASM1153E bridge chip delivers SATA III 6Gbps bandwidth for fast file rescue
  • Gold-plated contacts on industrial PCB ensure stable signal and long service life
  • Driver-free on Windows 7/8/10/11, macOS and Linux for instant cross-platform use

MacBook Air SSD Converter

The SMUGDESK adapter converts the proprietary 12+6Pin SSD from 2010 and 2011 MacBook Air A1369 and A1370 models into a standard SATA 22Pin interface. It includes a USB 3.0 to SATA cable for direct external connection. Designed for owners of those specific Apple laptops who need to access or repurpose the original solid-state drive.

Thermal Noise and Power

The passive PCB draws power from the host SATA or USB port and has no active cooling components. Gold-plated contacts on the industrial-grade board maintain stable signal transmission without generating measurable heat. Operation is silent because there are no fans or moving parts.

Build Integration

The board provides reserved screw holes for fixed installation inside a desktop SATA drive bay. The included USB 3.0 cable enables external use without opening a case. It works driver-free on Windows 7, 8, 10, 11, macOS and mainstream Linux. The adapter does not support 7+17Pin SSDs from 2012 or later MacBook Air models, nor drives from other manufacturers.

Highlights

  • Convert 2010/2011 MacBook Air 12+6Pin SSD to standard SATA 22Pin
  • USB3.0 cable included for direct external access to legacy Apple SSD data
  • ASM1153E bridge chip delivers SATA III 6Gbps bandwidth for fast file rescue
  • Gold-plated contacts on industrial PCB ensure stable signal and long service life
  • Driver-free on Windows 7/8/10/11, macOS and Linux for instant cross-platform use

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 12+6Pin MacBook Air SSD onto the adapter and which step do people often miss?

Align the proprietary 12+6Pin SSD with the matching socket on the PCB, press firmly until fully seated, then connect the included USB 3.0 to SATA cable or mount the board via its screw holes inside a desktop SATA bay; the step often missed is ensuring the gold-plated pins are completely engaged before powering on.

What maintenance or replacement will the USB 3.0 to SATA cable need over time?

The cable is a passive USB 3.0 to SATA assembly with an ASM1153E bridge chip; if transfer speeds drop or the drive disappears, inspect the connectors for dust or bent pins and replace the cable with another USB 3.0 to SATA lead — no other parts on the adapter require servicing.

What is the first limit I will hit when reading or writing continuously on this adapter?

The ASM1153E bridge caps throughput at SATA III 6 Gbps, so sustained sequential transfers will plateau at that bandwidth ceiling before any thermal or drive limit appears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.