We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slimline SAS cable with dual SFF8654 8i 74pin connectors, .8m length

SMUGDESK

SMUGDESK Slimline SAS PCIE 4.0 SFF8654 8i 74Pin Ultraport Extension Cable 0.8M

SKU CH-BWGQ-HSH98

PCIe 4.0 Slimline SAS extension cable with dual SFF-8654 8i 74-pin connectors for 24 Gbps NVMe and RAID links

  • PCIe 4.0 compliant for 24Gbps server interconnects
  • 32AWG low-loss copper ensures stable 24Gbps signal integrity
  • Dual SFF-8654 8i 74-pin connectors enable NVMe SSD expansion
  • Precision shielding reduces interference in high-density racks
  • 8m length optimises internal routing for compact chassis

Slimline SAS 4.0 Extension Cable

This 0.8 metre Slimline SAS extension cable carries PCIE 4.0 signals between dual SFF8654 8i 74pin connectors. It is built for enterprise NVMe SSDs and RAID controllers that require a 24Gbps internal link. The 32AWG pure copper conductors and precision shielding target reliable operation inside dense server chassis and high-performance workstations.

Compatibility Check Before Ordering

Verify that both the host controller and the target backplane or drive cage present SFF8654 8i 74pin ports rated for PCIE 4.0 operation. Confirm the 0.8 metre reach suits your chassis layout without excess slack or strain on adjacent components. This cable does not adapt to legacy SAS wide ports or external Mini-SAS HD interfaces.

Thermals Noise and Power Draw

As a passive copper assembly the cable adds no active cooling requirement and produces no audible noise. Signal integrity at 24Gbps depends on the low-loss 32AWG conductors and shielding rather than external power. Route clear of high-current power cables to maintain the designed anti-interference performance in normal server operation.

Highlights

  • PCIe 4.0 compliant for 24Gbps server interconnects
  • 32AWG low-loss copper ensures stable 24Gbps signal integrity
  • Dual SFF-8654 8i 74-pin connectors enable NVMe SSD expansion
  • Precision shielding reduces interference in high-density racks
  • 8m length optimises internal routing for compact chassis

Specifications

No published specifications for this item yet.

Questions about this item

Does the 0.8 m cable include both SFF-8654 8i 74-pin connectors or must I buy them separately?

The cable ships with dual SFF-8654 8i 74-pin connectors already attached, so no extra connectors are required.

When should I choose this 0.8 m length over a longer version?

Select the 0.8 m length when routing inside compact servers or high-density racks where longer cables would create clutter or airflow obstruction.

What does the 24 Gbps rating mean for my NVMe drives in a PCIe 4.0 server?

It provides full PCIe 4.0 x4 bandwidth per lane, letting enterprise NVMe SSDs and RAID controllers run at their rated speed without cable-induced bottlenecks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.