SMUGDESK
SMUGDESK Slimline SAS 4.0 SFF8654 8i 74Pin Cable .5M 24Gbps 32AWG
Slimline SAS 4.0 extension cable with SFF8654 8i 74-pin connectors delivers 24Gbps bandwidth over 0.5m using 32AWG copper for dense server chassis routing
- Slimline SAS 4.0 compliant SFF8654 8i 74pin for enterprise server storage
- 24Gbps high-bandwidth transfer for stable NVMe/SAS SSD performance
- 32AWG copper wire minimizes signal loss, crosstalk and EMI
- 5M compact length for clean short-range internal routing
- Server-grade construction for PCIe ultraport interconnect and storage expansion
Slimline SAS 4.0 SFF8654 8i cable
This Slimline SAS 4.0 SFF8654 8i cable provides a 74pin ultraport extension for enterprise server storage interconnects. It targets system integrators and data centre technicians who need reliable internal links between backplanes and RAID controllers. The 0.5M length suits dense chassis where longer runs would obstruct airflow or cable management. Builders working outside the SAS ecosystem or needing external connections will not find this cable compatible.
Signal integrity at 24Gbps
Premium 32AWG copper conductors minimise signal loss, crosstalk and electromagnetic interference across the link. This construction preserves the 24Gbps bandwidth required for stable NVMe and SAS SSD performance under sustained loads. No additional software, drivers or active components are bundled; the cable itself is the complete interconnect solution. Users requiring active signal conditioning or protocol conversion must source separate hardware.
Dense chassis headroom
The compact half metre length enables clean shortrange routing inside crowded server enclosures without excess slack. It comfortably handles PCIe ultraport interconnects and storage expansion scenarios where the backplane and controller sit in close proximity. Runs that exceed this reach, or installations needing rightangle connectors for tighter bends, will require a different cable length or form factor.
Highlights
- Slimline SAS 4.0 compliant SFF8654 8i 74pin for enterprise server storage
- 24Gbps high-bandwidth transfer for stable NVMe/SAS SSD performance
- 32AWG copper wire minimizes signal loss, crosstalk and EMI
- 5M compact length for clean short-range internal routing
- Server-grade construction for PCIe ultraport interconnect and storage expansion
Specifications
No published specifications for this item yet.
Questions about this item
Will the 32AWG copper conductors need periodic replacement in a server rack?
The 32AWG copper conductors are built for server-grade construction and do not require scheduled replacement under normal enterprise operating conditions.
What is the first performance limit reached when running 24Gbps transfers continuously?
The cable is specified for steady 24Gbps bandwidth; the Slimline SAS 4.0 SFF8654 8i interface defines the maximum sustained data rate.
Does the .5M length generate noticeable heat during all-day operation?
The short .5M design with 32AWG copper minimises signal loss and crosstalk, so heat buildup remains negligible during continuous high-speed use.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



